We need some information about phone first, original firmware and bootloader version, also which firmware did you flash? Can you acess bootloader mode (turn of phone and press *# and red button all together)?
i have bl oa.30 my mp is stock rsa remove a1r. i just tried flashing the same but it hang.after taking the battery off and back it doesnt turn on.no reaction wat so ever.cannot get into bootloader.i olready try to put back bl via testpoint but still doesnt turn on.
Did you tray with method from my link?
1. TP
2. Upload boot 0a.030
3. reflash with RSA removed and runphone patch applied + dual boot CG7&CG18 R47A....A1R
4. Upload PDS image
can u give me step by step procedure in doing this.. i cannot seem to make it work..eventhought i tp and put in bl 0a.30 i canot go to bootloader mode..how can i flash new mp..
Read thread from my link. Do TP first. start RSD lite, it will detect phone as " blank neptune LTE2. Close RSD and start Ramldr2, click send loader, click write boot and upload BOOT 0A.30. After this i hope that you can acess bootloader mode (press * # and red button all together). Use P2K easy tool 3.9 and reflash phone. If phone still not work, use again Ramldr2 and upload PDS image.
thank you.. i olready unbricked my phone.. but it is detected as v3i only itunes doesnt work..firmware R4441D_G_08.03.05R. is there any way to return to stock .a1r??
About Itunes button, upload this seems to phone: http://www.4shared.com/file/56029996...nes_seems.html
About screen blurry I have no idea, try to reflash again patched A1R use P2K easy tool to flash, if you still have problems go back to R4441D but again over R479 from first link.
If you have backup from your phone (A1R) you can tray to remove RSA from it and apply sticky patcher to CG1 then reflash phone.