[UPDATE v3i MP] NaNO_RaZZR ver1.3 by ritza_ll

**alaminok** · 10-05-2009, 08:10 AM

You can flash sticky to syicky
And non-sticky to sticky.
BUT , not from
sticky to non-sticky.

YOu can flash this MP if you have 0a.30 bootloader version and presently have r479 MP.

**promaja** · 10-05-2009, 12:43 PM

Originally Posted by mareepossa

hey alaminok,

i want to flash to this MP but my v3i is sticky fw. n i read in the fw sticky thread, it cant be flash to other non-sticky fw. =(

Can you tell us your phone firmware and bootloader version?
This firmware is sticky patched, so it is possible to flash it over sticky firmware, but we must know phone firmware and bootloader version.

**mareepossa** · 10-05-2009, 08:30 PM

Hi alaminok n promaja,

My Bootloader 0A.30
My sw version R47A_G_08.D9.86R

I'm having the R47A, so i need to crosflash rite. But i read the r47a to r479 conversion guide it can be done for sticky fw. am i rite?

**promaja** · 10-07-2009, 03:24 AM

Conversion is possible, but you need to flash first non sticky, sticky patched R47a... firmware, then R479... with Sticky patcher and runphone patch to change platform, then you can flash Ritza's MP.
So charge full battery and flash first this MP: http://www.4shared.com/file/65257105...tepatched.html
Charge full battery again then flash this: http://www.4shared.com/file/53609869...ched_R479.html
Over this MP you can flash Ritza's MP.
All this MP-s flash with P2KEasyTool v3.9

**mareepossa** · 10-07-2009, 09:38 AM

hello promaja,

thanks for helping me out. i flashed the v3i with MP 3DRfun litepatched. everythings going fine. But after I flash Scoarpatched R479 to my v3i, it wont switch on, it wont charging. is that normal? or something went wrong? however, i still can get into bootloader. but i do not dare to proceed flashing Ritza's mp. any suggestion?

thanks in advance

**alaminok** · 10-07-2009, 12:20 PM

if you have passed the flash, then it should be OK.
Sometimes one flash doesn't make all.
If reflash doesn't helps, then post again.

**promaja** · 10-07-2009, 01:29 PM

Originally Posted by mareepossa

hello promaja,

thanks for helping me out. i flashed the v3i with MP 3DRfun litepatched. everythings going fine. But after I flash Scoarpatched R479 to my v3i, it wont switch on, it wont charging. is that normal? or something went wrong? however, i still can get into bootloader. but i do not dare to proceed flashing Ritza's mp. any suggestion?

thanks in advance

In this case try to flash this: http://www.4shared.com/file/50705855...nepatched.html
Flash with P2KEasyTool, then flash Ritza's MP.

**mareepossa** · 10-07-2009, 09:40 PM

hello promaja,

it works like charm! thank u so so much. thanks to alaminok and ritza_II. u guys made my day. i just love my v3i. =)

**ritza_ll** · 10-07-2009, 11:36 PM

Congrats mate

Promaja always the best

The update of this MP is soon.......

**promaja** · 10-08-2009, 12:33 AM

I haven't counter how many time converted my phone to R47A... and back to R479... or R4441D... but probably I tested all V3i firmwares on it.

**alaminok** · 10-08-2009, 07:28 AM

Yes, promaja left no v3i MP to untest.

**sky444** · 10-08-2009, 10:44 AM

Originally Posted by mareepossa

hello promaja,

it works like charm! thank u so so much. thanks to alaminok and ritza_II. u guys made my day. i just love my v3i. =)

Don't expect any less from these fantastic people - they are the KINGS

**promaja** · 10-08-2009, 11:20 AM

Originally Posted by ritza_ll

Congrats mate

Promaja always the best

The update of this MP is soon.......

We are waiting for it, if you need some help, contact me...

**sky444** · 10-10-2009, 02:50 PM

had or have a little issue with the MP I think.

I had installed some skins and was using p2ktools to load some drm's and it froze about halfway through the upload. Yikes - well I let it sit there and sit there just to make sure it was froze just in case it came out of it. Didn't happen. So I tried to reflash my backup with RSD Lite and it created the image but when it sent the bootloader it froze too at 12% and FAILED. Well I tried it again - same thing. Tried another backup (the one before of course) SAME THING. I deleted those skins and the phone is working fine but I don't know what's up with the backup thing not working. Any ideas on what happened or what the problem might be ???????

**hatihitam** · 10-10-2009, 04:50 PM

A month ago i get some problem with you, instal skin and dawnload much of wallpaper using pk2tool v3. But problem was gone after i flash only the original flex of nano mp. With fully charge of battery. For skin install from tranflash using mini comander or moto cmd. Make new folder in c/mobile/skin/folder skin name (casesensitif n must same all of chracter whith .ski file name) copy paste from tf. Rebooth the phone. Try newskin if not work change skin first with another one. Go to moto cmd,open the newskin folder look at extention .ski and .dat file, not in capital just rewrite(rename) it.rebooth n enjoy your new skin

Thread: [UPDATE v3i MP] NaNO_RaZZR ver1.3 by ritza_ll

LinkBack

Thread Tools

Display

2 Users Say Thank You to promaja For This Useful Post

2 Users Say Thank You to promaja For This Useful Post

The Following User Says Thank You to mareepossa For This Useful Post:

The Following User Says Thank You to ritza_ll For This Useful Post:

2 Users Say Thank You to promaja For This Useful Post

The Following User Says Thank You to hatihitam For This Useful Post:

Posting Permissions