[GUIDE] Reviving V3i in Critical Error Dead 100% test

[Pzyduck]

Original post 0skii ..! (Oski4454)
English translation by Pzyduck

People Hello Good evening, Today I will explain step by step how a Motorola v3i shot back in a state DEAD!

Get Started!

Flashes "bad throw your cellphone and you CRIT. ERR. Dead?
Did you try Repair PDS with P2k Easy Tools?
Did you try to liberate not caught more?
Do you went wrong and not turn the TP?

Do not worry, I found the solution! Look:

We will need only three programs

RSD Lite 3.9 (anyone, only to verify that this in SBlank)
MSTools
Ramldr2.1

1. The first thing to do is look So Magic Test Point:





Ready? Abri RSD and check that you recognize him at SBLANK


2. Open the ramldr and click on "Send Loader" So look:



Once da "READY" we played WRITE BOOT and choose "boot_0A30_V3i.bin" and will give you everything "OK" as follows:



3. We TestPoint Again, check that the RSD detected in SBLANK And we flash the phone with MS TOOLS

ATTENTION!

TIPS: To let us flashing our phone we need to make flex TestPoint and place, with the motherboard

Look at how to do ... (SORRY FOR THE QUALITY OF IMAGE, IT WAS VERY DARK)

So do not you have to do!



So if you have to put the flex with the motherboard, for flashing



4. Once finished Flashing, TestPoint We opened again and the RAMDLR

Click on "Send Loader" wait for the "READY" and we play "WRITE BOOT" and select "patch_boot_0A30_V3i.smg"

ready once we load the Boot, with only WE PUT THE BATTERY IN DETECTING AUTOMATICALLY SBLANK


5. Remove and place the BATTERY, Open RAMDLR

Click on "Send Loader", waiting for the "READY" and we play in "WRITE PDS" and charge "pds_image.smg"


6. And finally, remove and put the drums, Open RAMDLR

Click on "Send Loader" wait for the "READY" and we play "WRITE BOOT" and select "boot_08A0_LTE2_V3i.bin"


And that's all ready turned the normal phone!

Here I leave the list of what we need:

Programs Needed

Stock Flashes

CLARO FF patched by me
MOVISTAR FF patched by me
PERSONAL FF patched by me
TIM FF patched by me

Some MP `s

Converter Extreme Final V3i_V3e By OkuRRe patched by me
Mp DeluxemaX by Nikko V3e v1.1 patched by me
By Le Grand Oskii 1.0 patched by me

Take the ke want!

Nothing is Ready!


Credits and Acknowledgements:
On the web
comunidadmoviles.com patches needed for taking
For the Boys Creators of `S MP and who climbed the FF so to use them!
A Bank Wate by all and to All Time!



PD: Do not be confused with Guides PYNEDA MILTON , CALLATEBLDAA, and SPERMANWEB ... Nothing to do ... if not do as I did the flash would not be able to do anymore!

PD2: roll to another forum please put my credits, because I broke his head doing this!

PD3: Good Bye SMART: thanks:
Thanks!

[alaminok]

Pzyduck, pleaze translate the language in pictures in DONTS to english.

[Pzyduck]

I see if I get a V3i, but above the pictures says the same thing in the picture

[Arkanoidblue]

I know this post is very old, but was now complete

Translate


If not connect the flex cable, flashing is not possible




Connect the flex cable in the slot for flashing

[Patrick_lm]

Pzyduck, pleaze translate the language in pictures in DONTS to english.

Sorry for my english...

is google translater

[Patrick_lm]

Pzyduck

I finished your tutorial.

My mobile is now recognized by
programs such as S Flash Neptune ... LTE2

I started with flash Mstools

ok
sent patch_boot_0A30_V3i.smg ok
sent pds_image.smg ok
sent boot_08A0_LTE2_V3i.bin ok

connect the cable is recognized as S Flash Neptune LTE2

connect in flash backup 3
sent comander enum return err

what to do now?

[pradyumnasagar]

i cannot write boot sending loader ok while sendind loader phone disconnect automatically

i cannot write boot when i click write boot a few second later phone disconnects automatically

[Jabbacks]

check ur testpoint again and make sure it says sblank in RSD Lite. Sometimes when you move around too much, you will lose your testpoint. Stay calm and redo the testpoint all will be fine......

Good Lucks!