how to revert back to stock firmware?

[m11c3]

how to revert back to stock firmware original v3i

my device info
bootloader : 0A.30
SW version : R441D_G_08.01.03R

thanks

[anwesh023]

Do u mean u want ur original Stock FW back...?
Then U should have a backup of ur Stock FW (Step that is needed during ur first flash) r download a stock MP from Downloads section, please check...

[Saurus]

Nothing wrong with BL or FW versions. Looks like phone has been upgraded from R479 or R47A. If you mean you would like it to look like a stock phone, just flash a stock unbranded CG2 (flexlash).

[Hendz]

@Saurus --
No it can't be. Ma problem's just the same as M11C3.
I can't get back to R4441D_G_8_1_03R stock FW by just flashing it up. And it always shows me "PHONE CODE SIG ERR".
My previous is NaNoRAZR which was ran with the same FW, and I need to revert it back to its origin FW just as M11C3 might want.
Been trying only flash CG2 but got no luck yet... Even I did a soft-testpoint to refresh my BL 0A.30 then flash it with 03R but just the the phone froze n stuck to BL only.
It's much so stranged to me then

My only reason, personally, why I use this 03R like Ritza-II, is that I keen on how this FW can show different font on the Network, while the Network name itself can always be changed to whatever we want. And again, the Clock-font can be altered too to be a big digital-clock one rather than on any other FW
I've tried the 03.05R but it's much restricted.

[Jabbacks]

@Saurus --
No it can't be. Ma problem's just the same as M11C3.
I can't get back to R4441D_G_8_1_03R stock FW by just flashing it up. And it always shows me "PHONE CODE SIG ERR".
My previous is NaNoRAZR which was ran with the same FW, and I need to revert it back to its origin FW just as M11C3 might want.
Been trying only flash CG2 but got no luck yet... Even I did a soft-testpoint to refresh my BL 0A.30 then flash it with 03R but just the the phone froze n stuck to BL only.
It's much so stranged to me then

My only reason, personally, why I use this 03R like Ritza-II, is that I keen on how this FW can show different font on the Network, while the Network name itself can always be changed to whatever we want. And again, the Clock-font can be altered too to be a big digital-clock one rather than on any other FW
I've tried the 03.05R but it's much restricted.

RitzaNano is RSA removed. You gonna have to look for the V3i undo patches to put back RSA then flash your original stock firmware. They're somewhere in the guides.

[Hendz]

But it seems so shamed on me coz NaNoRAZR didn't have a full patch & full undo-patch enclosed by the author the time the monster launched. I have a pack of patch for this 3R but the letters is not in Latin, not in Russians too, and it's so weird so no one can read it ever.
And when I tred to compare the 3R's CG1 ELF-patch Address used by Ritza against the original from an updated-PortKit, both were different.

I have an R4441D_8.1.3R of fully RSA-removed by Adrian <http://www.4shared.com/file/pFcK5AeU/R4441D_G_080103R_RSA_Removed_b.html>... but still CAN'T overwrite it. Same matter does when I try removing the RSA manually by maself from stock-FW 3R to be flashed in, and still can't overwrite it also.

Today I work with this monster with almost no ELFs on it except for just a Start_Menu

[alaminok]

So, your phone is fine now ?

[Hendz]

Yea, I guess And I still use this B5.86R-based FW. And no errors on it. Everything seems so natural by Motorola which is no ELFs in it, and no Patches at all. - Run so smooth with 2GB microSD. And has a good battery power-management inside.
I've mod it just a little. Mainly in the "mma_ucp", and the font - to make it more thin but still focused rapidly.
I've also totally make this FW to respond as fast as it can by lowering it up at CG15's "delays".

The only thing makes it so (maybe) weird is on the Phone Number section. Moto keeps us to write a fully International Phone Number notation prefixed with each Country Code like "+62xxx" for Indonesian etc. - So we MUST write it up a full phone number each time we wanna save it in the phonebook. This way, you can fully recognize the caller when he/she calls you at any time or writes you some SMS.

About the answer how to escape from the NanoRAZR, I personally used a HARDWARE-TESTPOINT method. Make it blank immediately, inject it with 0A.30 again, then flash it up with other FW-version. - That's what I've done and works for me though