my phone doesnt recognise by windows

[xbekoolx]

i repaired pds using P2K easy tool 3.9 and then my phone doesn't recongnise by my windows... i even have latest driver installed... what should i do? i'm in delima...

[Jabbacks]

Look for V3i Repairs file. Perform TP.... Flash repairs file with Flash & Backup. You might end up in bootloader mode but that's ok. Restore from backup.

[CGustito]

make a test point with the p2k easy tools 3.9, should recognice but not in the first attemp

[Hendz]

Maybe you could try ma file named "V3i__FIRMAWARE__BLANKER" here --> MobileModding.US - View Single Post - R479_G_08.B5.86R to R4441D_G_08.01.03R
It works similarly like a soft-testpoint method. But you gotta be careful on it

[chinito20]

is important use the p2k easy v 3.7 to this model fhone v3i
the other version is for other moto sometimes cause error-s use the p2k easy
3.9 so. if you fhone v3i show information y mode flash you can repair
with a flash to same version and bootloader. please check all

[Hendz]

I got P2K-EasyTool-3.9.
Yea even when I flashed with F&B or RSDLite, in this case, sometimes got some errors. It's not actually errors but the phone says unsatisfied thing like -->> "PHONE CODE SIG ERR" and somtin like that

Thankz Chinito for enlightenin us

[Saurus]

Maybe you could try ma file named "V3i__FIRMAWARE__BLANKER" here --> MobileModding.US - View Single Post - R479_G_08.B5.86R to R4441D_G_08.01.03R
It works similarly like a soft-testpoint method. But you gotta be careful on it

Wow,@Hendz, you've done some serious work. Quite impressive, but I have a couple questions - if phone has BL 0A.30 after flash (step 1), why run ramldr2_0.31 (step 3-5)? Just pull/reinsert battery and detect with RSD Lite or F&B 3. Also if you blank the PDS (CG0) you lose IMEI info - there's no (published) way to recover it.