Thread: [ROKR E8] SUPERGUIDE [must-read]
- 06-05-2009, 10:39 AM #1
[ROKR E8] SUPERGUIDE [must-read]
First of all, and overall things, thanks for joining our great community, ModMyMoto.
Superguides, are, most of the time, compilations of all the guides that are inside our beloved community. We do have a Guides sections, but, n00bs tend to miss it all over the time, so it's more practical to have a thread, with all the information right away.
The credit for this guide most go to each and everyone who makes ModMyMoto a great place, moderators, users, novates, you and everyone; But specially i'd like to thank: adriangatillo, traycerb, ali and all the people who has done anything to improve our phone, because it it wasn't for them, nothing of this would be possible.
First, Read this guide, then you are allowed to post
; After reading, you need to remember that we are a community, we are not payed for anything we do here, neither are the owners of the site, so if you don't get answered, perhaps most of our members are busy, or your question has been already answered here, so relax, do not get angry, and breath!, No member and neither M3 is responsible for any kind of damage that your phone might suffer for incorrect procedures, but if you follow this guide, carefully, your phone should suffer NO damage at all.
Contents
- Introduction
It all starts with baby steps - Basic
Jargon, Drivers, MGX, flashing, TelNet - Vanity
Skinning, fonts, Menu Modding, Distribution changing - Downloads
Where do i find MGX, skins, Firmwares, Language Packs - Frequently asked questions
Things that usually happen after certain procedure and might freak you out.
------------- Introduction -------------
- Back up all your settings
- Fully charge your phone before doing anything
- It'd be nice to close your apps, in precaution of any lags or freezing that might end up messing with RSD lite
------------- Basic -------------- USB Drivers
- Cables and Computer
- Flashing!
- FTP/Telnet [How to & directories]
- How to install MGX
------------- Vanity -------------- How to install themes
- Fonts for ROKR E8
- Custom spinner mode
- Increse direct access on menu
- Increase direct access [MGX]
- Increase Album Art size
- Custom UserMenuTree [custom Main Menu]
Edit your Firmware
How to make a custom Language Pack
------------- Downloads -------------
- noRSA bootloaders
- Stock Firmwares
- Skins
- MGX
- Modded FirmWares
- Language packs
- Wallpapers
- Fonts
- RSD lite 4.3
------------- FAQs -------------
||Basic modding & flashing||
What in the heck is modding?
Modding is to customize your phone to whatever you like, with the only limitations that your and everyone else knowledge gives you, so sky is the limit [at least if you are skilled enough]; Remember, modding is all about sharing, so don't be selfish, we are all n00bs
.
What happen if i flash my phone
It'll improve it's speed, it'll accept formats that won't be accepted when stock [like MGX, MGS], and it'll be customized to your needs.
When i flash, do i lose all my information?
Yes, but you can always do a backup of all your CodeGroups, as seeing here.
Doing a backup of each CodeGroup is tiring, can i do something else to be safe?
Sure, do a backup of your important files
, this MGX might help you.
What are the files i should manually backup and what's their location?
SMS, Contacts [/ezxlocal/sysDatabase]
Websessions [/ezxlocal/download/appwrite/NetProfile]
UserMenuTree [/ezxlocal/download/appwrite/am]
CFG files [/ezxlocal/download/appwrite/setup]
If i flash, do i lose all my songs [the ones on my microSD and my phone]?
No, but you'll lose things like Websessions, personal configurations of the CFG files, contacts, SMS, etc.
Now we have an MGX that will make the trick for you, HERE
How do I find what bootloader I have?
Turn your phone off, then press the * and # keys while turning on, and this screen should appeir.

How do I find what firmware do i have?
Main Menu> settings> Phone Settings> Properties> AP S/W version. It will look something like R6713_G_71.02.07R.
If i get please manually power this phone on, or so xD; what can i do?
Disconnect and then take the battery out, and turn again, it doesn't matter if you connect it or you don't.
BootLoaders and recomendations
Bootloader 06.A3:
Flash 06.A3 noRSA, then you can flash any FW, like THIS
Bootloader 06.A5
Flash 06.A3 noRSA, then you can flash any FW, like THIS
Bootlaoder 06.A9
Flash 06.A9 noRSA, then you must Flash 06.A9/06.AA/06.AC Patched CG31, after that, you can any FW, which doesn't contain CG31.
[How do you know that? The FW must specify it, if not, probably it has CG31, and you'll get an error]
Bootlaoder 06.AC
Flash 06.AC noRSA, then you must Flash 06.A9/06.AA/06.AA Patched CG31, after that, you can any FW, which doesn't contain CG31.
[How do you know that? The FW must specify it, if not, probably it has CG31, and you'll get an error]
Bootlaoder 06.AA
Flash 06.AA noRSA, then you must Flash 06.A9/06.AA/06.AA Patched CG31, after that, you can any FW, which doesn't contain CG31.
[How do you know that? The FW must specify it, if not, probably it has CG31, and you'll get an error]||New to MagX||
My games from E2/V8/Z6 are not working on E8, what can i do?
Try with this little handy app to readapt them.
I want to use P2KTools, MotoMidMan and SkiMan, why don't they work on my awesome phone?
Welcome to MagX, those apps are for P2K, and they'll be obsolet with your new phone, get used to P2K
.
Can i change my BootLogo and StartUp animation?
Sure, this MGX will do the trick for BootLogo, and to change the animation, well, Main Menu> Settings> Themes> choose your theme> Options> Edit> right arrow> scroll down to Power On Screen> Center Button.
What's the maximun memory on ROKR E8?
THe maximum is 32GB on the newest MagX like E8 or ZN5.
I want to use P2KTools, MotoMidMan and SkiMan, why don't they work on my awesome phone?
Welcome to MagX, those apps are for P2K, and they'll be obsolet with your new phone, get used to P2K
.
||Common Issues||
I want to put themes in my E8, but it's stock and i don't want to flash, can i use modded skins?
Sure, Check this out.
Why i can't install MGX?
Probably because your Firmware doesn't support them, try with any new FW, like 1013CR from ilove3d or BestWebs.
Why i can't install MGS?
You need to have at least 1410R from ilove3d to run them [1410R or 1013CR are the only ones that run MGS natevely].
I can't see my menu, what's wrong?
Probably you have erased your UserMenuTree, if you have a backup [clever boy
] go to ezxlocal/apwrite_am/UserMenuTree and restore it [copy/paste]. If you didn't then you'll have to reflash.
What do i do if my phone show the message: Please insert subsidy code, when i turn it on?
Your phone, is probably, locked, get yourself a unlock code and then let us know, remember that unlock codes for MagX must have 16-digits, if it doesn't, believe it won't work
.
How do i know if my phone in unlocked?
Insert a SIM Card from a different company from the one you are using in that moment, and if the message, Please insert subsidy code, appeirs, then is locked, if not, then your phone is unlocked.
I lost my Setting [MMS, SMS, etc]. What can i do?
Check this website
, Or if you want, you can check this THREAD [U.S. Settings].
I want to flash a modded FW, but it's just for 06.A3 BL, what can i do?
Flash your noRSA, then flash acording to this post, then remove CG31 from your FW, and flash it
||Random things||
What are the functions of each CodeGroup on Linux?
Well here is a little post of what each of they do.
I'm bored of the vibration [Haptic], can i turn it off?
Sure, install this MGX
How do i know which Firmware do i have
Just type *#9999#, and you'll see
Offset 11D = power on without sim card
||Trivialities||
Which is the best forum in the world?
Without any doubt, ModMyMoto; by far the best, some others might be more advanced and might have better smilies, but no other will be as friendly and helpful as this one, no other will compilate as much information as only we do, and besides, we are the biggest Motorola Modding forum in spanish and english.
Last edited by Av3LaR; 11-18-2009 at 08:33 AM.
- Introduction
-
15 Users Say Thank You to Av3LaR For This Useful Post
anandraju (12-01-2010), drkReper (08-30-2009), halltopia (07-08-2010), jaykay (10-06-2009), jukebox355 (06-12-2011), Miguel AOT (08-23-2009), motolife (09-28-2009), nikolov (06-07-2009), OCM (06-06-2009), Paule (08-01-2009), seiken_k1 (06-11-2009), Semseddin (07-11-2009), Skrilax_CZ (06-06-2009), SocaSlvr (06-05-2009), weedfree (02-17-2011)
- 06-05-2009, 10:35 PM #2
Itty Bitty Modder
- Join Date
- Mar 2008
- Posts
- 2
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 61
- Uploads
- 0
no wonder i haven't received replies from the MotoJedi... this answers all my questions. Thank you Masters. Thankyou
Padawan Sabretooth
now i am really excited to get my e8 in two days! i was starting to regret having ordered it because of the lag issues i recently stumbled upon.
- 06-06-2009, 04:37 PM #3
You know that it's R6713? And "Bootloader", not "Boot Loader"?

Just details, excellent guide.
Thanks Semseddin for the signature and avatar.
- 06-07-2009, 10:30 AM #4
- 07-01-2009, 10:17 PM #5
ooh thks brother its vool hehehehe Superguides!
La Tristeza es lo más hermoso que tengo. Por que cuando pierdo la felicidad, es lo único que me recuerda que estoy vivo

- 07-10-2009, 11:02 PM #6
I need to ask this, but it's stupid cuz I read it somewhere before.....
Well ,Im bout to buy a 16GB Micro SDHC. It works with any class?? cuz i've seen that u have class 2, class 6, some have more or less speed. Plz enlight me a bit
.

- 07-10-2009, 11:13 PM #7
The reader is a 2.0 reader, the class is thing is more a speed issue, as our phones are able to read those, you can buy any class, the thing with them is that if you buy (let's say class 10 cards, only announced) a card with higher speed that the supported on our phone, you will only be losing a couple MB of transfer speed rate, but not much more
So go ahead
- 07-17-2009, 03:00 AM #8
Itty Bitty Modder
- Join Date
- Oct 2008
- Location
- Philippines
- Posts
- 9
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 29
- Uploads
- 0
i have a problem with changing themes, i want to change themes without flashing so i used the theme manager that av3lar had provided, but im kinda stuck in detecting my modem, it just stop on scanning wlan something.
is there a program i should install? sorry kinda new with E8
- 07-17-2009, 09:03 AM #9
- 07-22-2009, 07:14 PM #10
Itty Bitty Modder
- Join Date
- Oct 2008
- Location
- Philippines
- Posts
- 9
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 29
- Uploads
- 0
ok i did be able to "upload" some themes using the themeuploader(don't want to flash my E8) but here are other problems...
all i can see is some crappy image of ROKR(the default wallpaper) whenever i apply some themes(those themes came from m3 as well), it doesn't even change the buttons, backgrounds, etc. & all of the installed themes are all 2.65mb(ea), i think they should vary depending of the kind of themes(had E6 before & didn't have any problem installing themes)
- 08-21-2009, 08:04 AM #11
Itty Bitty Modder
- Join Date
- Aug 2009
- Posts
- 6
- Thanks
- 2
- Thanked 0 Times in 0 Posts
- Downloads
- 26
- Uploads
- 0
wakatsik if u figure out the answer to ur problem plz post it because i have the same problem i put themes on my rokr e8 (no flash) and when i use them nothing changes. Also at the end of any theme i put on my e8 it says theme name (modified)
- 08-21-2009, 09:02 AM #12
- 09-10-2009, 01:07 AM #13
A "How to install Java" would be nice since i dont know how to lol......i really dont though
Malik
SiG Thanks to nuru_theone
- 09-10-2009, 08:57 AM #14
- 10-25-2009, 03:55 PM #15
Itty Bitty Modder
- Join Date
- Oct 2009
- Posts
- 1
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 16
- Uploads
- 0
I think i fried it.
so i tried putting a new bootloader on the 6.3a and i was the 6.ac and im pretty sure that was stupid, since my computer does not detect it at all, confirmation?


LinkBack URL
About LinkBacks

Reply With Quote



