U9 firmware flashing problem

[g-star118]

Hi can any body help me out.. I tried updating my phone with the Gold Edition Firmware: R6632_G_81.17.04R_LP0021_GSJPICOHGINGOLD.
And my previous firmware was: R6632_G_81.11.29R_A_GSJPICOORAFR052_PDS018_LP0539A _GSJPICOORAFR_S099_E018_R006_G003_1FF

The problem which is showing on my phone after flashing is:
Bootloader
06.2A
Err: A5,70,27,00,1F

MEM_MAP Blank
Service Req'd

[hyber_99]

try with R6632_G_81.27.05R firmware
and then flash the boot loader 6.28.

and post results

[evilJ]

hooooo~
no way back to the old F/W now

you flashed the Bootloader 06.2A...

[g-star118]

@evilJ I tried flashing it with the firmware I had before but I am still getting the same problem..

[Av3LaR]

First the bootloader and then the firmware, it should work

[evilJ]

flash the bootloader 06.2A

and

get yourself one of the F/W which says *requires bootloader 06.2A*

or flash the modded F/W *Magxcn 3.2*(<<- I'm like a salesman now xD )

[g-star118]

Thanks for the Help guys, that really makes alot of sense, as is a new firmware, there should be a new bootloader as well.. As soon as I get my phone charged again I'll try it and post results. @evilJ I'll difinitely be trying out that firmware...

It didn't work... I recharged the battery, flashed a new 06.2A bootloader, then the firmware and I'm getting the same message on the phone..
I believe that I've bricked it.... Is there any other option I can try..

[evilJ]

did you flashed the noRSA patch?

[g-star118]

@EvilJ No.. What is that for..

[evilJ]

the official 06.2A bootloader have a protection that protects the F/W from being modded...(or something like that xD)
that's why there're F/Ws that say"RSA protected" and "requires bootloader XXX"...

that noRSA patch will crack the bootloader, so that the modded F/W can work correctly after flashing it.

[Xtian89]

You have to flash the patched cg31 after you flash the NoRsa boot... It´s part of the process...
You have to read all the guides carefully... Check HERE

[g-star118]

I believe that I've bricked it... I flashed the noRSA bl, but got the same results... Then I flashed the psy Linux modded firmware, same results..
@Xtian89 My phone is a U9, I don't think that will be able to work...
But I was trying to analyze the information.. Can't quite figure it out.. MEM_Map Blank, what does that really mean... @Av3Lar, I see that you have alot of post about firmwares, Have you come across this problem yet..

[Xtian89]

Ahh, sorry, i thought you had an E8 :P

[g-star118]

Guys I Flashed the phone last night with the original firmware, and it worked.. I watch the thread that Xtian89 posted, and I realized that I wasn't watching all the nessessary info on the RSD program good enough... I am planning on flashing it again... But are there any modded firmware that can be used with Bl 06.2A

[evilJ]

@g-star118

psy Linux modded firmware requires a bootloader 06.28, not 06.2A
it surely will NOT work if you are combining psy mod 0.3 with bootloader 06.2A

there're TWO modded F/W that work with 06.2A
1. MagxCN 3.2 (Chinese mod, stable, with MPKGBox and Magicbox included)
2. Project Evo for U9 (Russian mod, still in BETA, comes with MPKGBox and PEManager.)

For more information about Project Evo for U9, here's the link: (google translated)
Click ME