(Guide) The seem editing guide... for Noobs:)

**ferrarix** · 09-10-2008, 02:03 PM

Make sure the phone is being shown connected in P2k Mode (not AT mode or OBEX).

Post a screenshot pls.

**Lee Ann** · 10-15-2008, 12:03 PM

Hi there ferrarix. Please help me with something.
I have the same problem as yoclay.

"When I connect with P2K Tools and hit SEEM editor, the window comes up but at no point do I get the table WITH VALUES. Instead I just get a bunch of empty boxes, no matter what SEEM I put in the top. Can anyone advise me?"

Here's a screen shot.

I don't know what's worng. Is it my frameware? My frameware is R263313_U_A0.01.10R10.
Thanks.

**Semseddin** · 10-15-2008, 02:15 PM

@Lee Ann,

Regarding the R263313, you have a V9. You should set the P2K Mode to P2K05 from the software settings.

**Lee Ann** · 10-16-2008, 12:11 PM

Umm..I can't find the option for the "software setting" in the program.

Please help.
Thanks.

**Semseddin** · 10-16-2008, 01:05 PM

Follow the picture, then click settings. Browse from P2K Mode tab to P2K Protocol Version and set that to P2K05. Click ok, then restart P2KTools VS for the changes to take effect.

**Lee Ann** · 10-17-2008, 04:34 AM

Thanks a lot Semseddin.

I was able to find it change it and it works just fine!

Thanks!

**renz0** · 11-21-2008, 10:24 AM

offset 65 - bit 0: Settings > Ring Styles > Event Lights (funlight.pat required in /a/mobile/audio/) (1 on, 0 off)
.. it is work well for v3x??

offset 81 - bit 2: Multimedia > Videos > Videos Setup > Styles > Black and White (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 3: Multimedia > Videos > Videos Setup > Styles > Bluish (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 4: Multimedia > Videos > Videos Setup > Styles > Antique (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 5: Multimedia > Videos > Videos Setup > Styles > Reddish (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 6: Multimedia > Videos > Videos Setup > Styles > Greenish (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 7: Multimedia > Videos > Videos Setup > Styles > Negative (1 on, 0 off) (offset 82, bit 0 must be set to 1)
. . is it work for v3x too??

BTW about editing seem,,
: offset 65 - bit 0: Settings > Ring Styles > Event Lights (funlight.pat required in /a/mobile/audio/) (1 on, 0 off)

"(1 on, 0 off)" how could i to set at "1 on & 0 off"?

**Trickybitch** · 11-21-2008, 04:59 PM

Originally Posted by renzokuken

offset 65 - bit 0: Settings > Ring Styles > Event Lights (funlight.pat required in /a/mobile/audio/) (1 on, 0 off)
.. it is work well for v3x??

No it doesnt work.

Originally Posted by renzokuken

offset 81 - bit 2: Multimedia > Videos > Videos Setup > Styles > Black and White (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 3: Multimedia > Videos > Videos Setup > Styles > Bluish (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 4: Multimedia > Videos > Videos Setup > Styles > Antique (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 5: Multimedia > Videos > Videos Setup > Styles > Reddish (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 6: Multimedia > Videos > Videos Setup > Styles > Greenish (1 on, 0 off) (offset 82, bit 0 must be set to 1)
bit 7: Multimedia > Videos > Videos Setup > Styles > Negative (1 on, 0 off) (offset 82, bit 0 must be set to 1)
. . is it work for v3x too??

Yes they work.

Originally Posted by renzokuken

BTW about editing seem,,
: offset 65 - bit 0: Settings > Ring Styles > Event Lights (funlight.pat required in /a/mobile/audio/) (1 on, 0 off)

"(1 on, 0 off)" how could i to set at "1 on & 0 off"?

**uwie** · 11-21-2008, 10:31 PM

1 it means u must check that bit..
0 it means u must do uncheck

**renz0** · 11-22-2008, 12:19 PM

thx,,so thats seem for videos style its work?! thats great

**fahrulv9** · 12-07-2008, 12:35 AM

hello anyone..can somebody help me,,
i just put in some skins via p2k commander into my v9 (R263313-U-A0-03-2ER)
and now every i access media finder it said "need more storage space... delete files?"
but i'm pretty sure that my v9 has a lot of space
Phone free mem = 48mB
free memory device = 800mB

**ferrarix** · 12-07-2008, 01:34 AM

Ask in the V9 section mate not here. This is the V3x place and a completely irrelevant thread

.

**Skrilax_CZ** · 12-08-2008, 03:26 PM

Your a partition is near to full. Delete one skin (not Alkali).

**FrankHunter** · 12-16-2008, 12:27 AM

Place G24-L on a EVB, connect USB J380 on EVB to USB port on PC, what does this mean, i dont want to start off wrong

**ferrarix** · 12-16-2008, 12:14 PM

Originally Posted by FrankHunter

Place G24-L on a EVB, connect USB J380 on EVB to USB port on PC, what does this mean, i dont want to start off wrong

Where is that written?

Thread: (Guide) The seem editing guide... for Noobs:)

LinkBack

Thread Tools

Display

The Following User Says Thank You to Semseddin For This Useful Post:

The Following User Says Thank You to Trickybitch For This Useful Post:

The Following User Says Thank You to uwie For This Useful Post:

Posting Permissions