Flashing back to VZW Monster issues.

[Jaffa-Kree]

All -

Tried a search, but it didn't show much for my issue (and I'm not very good at searches so sorry if this is already posted.)

Running into an issue here trying to get VRZ_V3m_01.05.0AP up an fucntional.

I tried to do the Vivo flash, but couldn't get it working so I thought I would revert back to VZW original and try again.

After flashing to VRZ_V3m_01.05.0AP, I just get a phone icon on the top with a line through it..such as no service. I get no signal bars or anything.
Trying to do a *228 results in nothing.

I have tried flashing to GATW_X_01.18.02P then back to VRZ_V3m_01.05.0AP and even upgrading after that to NEWC_01.09.02P. still won't allow me to do a *228 or anything.

I've also tried putting my service programming back using QPST. The only thing that happens then is I get my number showing up on boot but same issue.

No sound from vcast animation and the Phone icon with a line through it and no status bars.

Any assistance would be appreciated.

Phone: V3m
Used MultiFlashFlex app to flash. After the connected came up on the screen I disconnected phone and powered off/on (recycled?) and then tried to do a master reset/clear but that seems to whig out my phone.

Again, any insight on how to fix would be great!

PS - I think this may be in the wrong thread. If a mod is around, please place appropriatly and I'm sorry.

J-K

I got it working now. To get the functionality back, I had to upgrade to FW V3m_01.19.05P.

My phone was newer (1-3 mo old) so maybe that had something to do with it.

Now that I can fix it, I'm going to try the Vivo FW again

[Skrilax_CZ]

You won't find much info on V3x forum for V3m! Look to the thread CDMA phones V3c, V3m, K1m etc.

[Trickybitch]

This is not the V3m section. Ask in the correct section

Closed.