RSA removing

[polle]

I suceesfully removed RSA from my second K1 according to the guide.
However I get the phone asking for a "subsidy code"
First I tried to unlockit with mstool, the program said unlocked, but after restarting got a sig error, after redoing the RSA removing procedure, I got at the same point.
Reading carefully the RSA removing thread it seems to be a pds problem, that can be solved by flashing the 'generic pds'
Correct?

[trimesh]

Yes - if if comes up with a SIM lock or displays "terminal blocked" you can fix it by flashing the generic PDS - obviously, anything you flash after this will need to have the "don't crypto PDS" patch applied.

And make sure you have a backup of the stock PDS, too, just in case you ever want to flash it back.

[polle]

ok, then I will try that one of these days

edit:
Had some rare experiences today, flashing the generic pds with ramdlr2 didnt go as espected, did to try a few times but afterwards still got the subsidy code question; Messing around with ramdllr2 I got the phone connected as bootloader 300, then after wards when I connected with the dualbootscreen it reported bootloader 08 of something like that. at one point I tought it was bricked completely, I got bootloader 0 in ramdllr2, the phonescreen was black and the only thing you could see was that it was connected inramddlr2. Then I started f&b,it saw also a phone connected but not a type. I flashed then a rsa removed mp (from rodrigo castillon, I believe) but still a back screen, after some further trying with ramdllr2 I suddenly was able to start the phone and even the subsidy code was gone, so eveything ok.
Now I got a working phone again.
I has now sw: R452H4_G_08.00.09R
Question: when I now flash again with the MP that gave me the subsidy code question, will I have the same problem or is it now fixed for all MP?