Thread: bad flash?
LinkBack URL
About LinkBacks- 05-07-2010, 12:47 PM #1
Itty Bitty Modder
- Join Date
- Dec 2008
- Posts
- 3
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 11
- Uploads
- 0
bad flash?
Hello!
I tried this:
http://www.modmymoto.com/wiki/index...._K1_Remove_RSA
whith this:
http://www.modmymoto.com/forums/down...=file&id=18101
Everything was good.
But when I turned on the k1 it ask for a code.
What is the code? Or something was wrong?
Thanks,
max 8 characterLast edited by spenderke; 05-07-2010 at 12:47 PM. Reason: Automerged Doublepost
- 05-07-2010, 01:16 PM #2
So I Hear You Can Mod
- Join Date
- Jan 2010
- Location
- obviously on earth
- Posts
- 442
- Thanks
- 105
- Thanked 101 Times in 77 Posts
- Downloads
- 181
- Uploads
- 0
did you remove rsa of your phone manually before flashing the file mentioned by you. if you didnt then flash your backup and see the guides section on how to remove rsa and also other things. and yes dont forget to take backup of pds of your phone if you are removing rsa. to know about it see guides section.
_______________
NEVER FORGET TO TAKE BACK UP OF YOUR STOCK PHONE STUFF AND CHECK THE GUIDES SECTIONS TO CLEAR DOUBTS
- 05-07-2010, 01:20 PM #3
Retired Droiderator 
- Join Date
- Mar 2007
- Location
- Graham, WA
- Posts
- 3,168
- Thanks
- 1,257
- Thanked 1,237 Times in 833 Posts
- Downloads
- 4
- Uploads
- 0
Its a PDS issue, need to do the generic PDS. really busy ATM, just jumped on. I'll try and find a link/guide
Heres your file, sorry not much of a guide, just a flash file
http://www.modmymoto.com/forums/down...=file&id=18071Last edited by motomudder420; 05-07-2010 at 01:33 PM.
Thanks Sublime1184 for the awesome siggy
- 05-08-2010, 02:07 PM #4
Itty Bitty Modder
- Join Date
- Dec 2008
- Posts
- 3
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 11
- Uploads
- 0
What can i do with this generic pds file?
- 05-09-2010, 12:18 PM #5
So I Hear You Can Mod
- Join Date
- Apr 2009
- Location
- where the vikings came from
- Posts
- 446
- Thanks
- 172
- Thanked 123 Times in 92 Posts
- Downloads
- 67
- Uploads
- 0
Originally Posted by motomudder420 
just flashing
/
-
The Following User Says Thank You to tomauswustrow For This Useful Post:
MotoMudder (05-10-2010)
- 05-10-2010, 03:35 PM #6
Itty Bitty Modder
- Join Date
- Dec 2008
- Posts
- 3
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 11
- Uploads
- 0
1000 thnx
The hole method:
1. Go to boot loader: turn off your phone, hold * and # button and without releasing them press red (end call) button.
2. Open RAMLDR2 and it should say that phone is connected.
3. Press "Set BLANK irom 0300" button and wait until it does it's job.
4. Close RAMLDR2 and disconnect your phone's cable.
5. Phone will be in blank mode. Open RAMLDR2 and it should say Boot version 0300.
6. Press "Send loader" and wait until program says "ready".
/*new*/
7.Press Write PDS, select generic pds file
8.Happy and thnx
JEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
Reply With Quote
