[Guide] Remove K1 RSA using SoftTP (no disassebling, no warez needed)

[trimesh]

Help, I've followed the instructions at the beginning of the post, and also got the request for a "Subsidy Password" after flashing...
I have the above listed PDS, how do I flash it to my phone, and using what program? Please help me, my phone is out of commission until I get this sorted out.

Edit: I've tried Opening the PDS .bin file in Flash&Backup, and when I attempt to "Save to Phone" I get a "Cannot write PDS in the active phone profile" WTF?

If you haven't backed up your PDS yet, so do - you will have to find a copy of the (cracked and warez) mstool8r to do it.

You have to write it using ramdlr2 - power up the phone in blank mode (hold "*" and press power), then connect to ramdlr2, press "send loader", "write PDS" and then select the generic PDS file.

<Power up phone with "*" held down>
<Connect USB cable to computer>
Phone connected
Boot version: 0300
<Click "Send loader">
Sending loader
Ready
<Click "Write PDS" and select generic PDS file>
Write data to phone
OK
Phone disconnected

[DamianMarc99]

will this work on k1/s

[Trickybitch]

will this work on k1/s

on R47121, no.

[Saiyajin]

Man ,how to i know why a Patched firmware suitable for your phone?
My Boot is a :0A.B2
R4527_G_08.22.09R_A
Thanks!!!

[quickmouse]

DUDES!!!! The flashes that are linked in this tutorial have been edited and mistaken for flashes from ANOTHER tutorial. I checked with http://www.archive.org with the url of this tutorial, http://www.modmymoto.com/forums/showthread.php?t=67233, and it originally pointed to the same flashes but without don t_cypto_pds, sec_ver_prot_reg_locked patches. I checked by running those autopatchers on the original ones and comparing the results... it seems that because they put the same filename on those flashes they got mistaken and merged to the same link in M3 download section.............

bottom line, I know why at some point this tutorial started failing... if you flash the newer one, the one with the don't_crypt_pds patch, you'll need the generic_pds.

PLS someone fix this

If you flash the flashes that are currently linked in this tutorial, you'll NEED generic_pds

[pradeep1592]

it was great and prety easy

[ssbm29]

flash succeed thank you very much.

[Endrance]

When I run RAMLDR2 it says my phone isn't connected...is there a way to fix this? I'm using Win7 32bit I've tried running under admin with compatibility settings also. My S/W ver. is R452F_G_08.05.0BR

[angelababy]

What version is your bootloader?I removed RSA with this. I was on Bootloader 0A.B2.

[Endrance]

whooooo! just removed my RSA thanks to SocaSlvr.

[XtorT69]

I connect my phone in bootloader to ramldr2 and it says connected but when I select "Set BLANK irom 0300" it says Set Blank and nothing happens on the phone or the ramldr2. I have left it for a long time and nothing.

The bootloader is OA.B2
software: R4527.G.08.42.0BR_B

[juanchiviriz]

F.u.c.k you rsa!!
Thanks !!! ^_^