[Guide] Remove K1 RSA using SoftTP (no disassebling, no warez needed)

[harperzoid]

Help!!!
I followed this guide and all went well until the very end. Now I have no screen!!
Keypad lights up for a minute if I remove and replace the battery but that is all.
Any help appreciated cos now I got no phone!!!
BTW noobs like me shouldn't be doing this methinks!!!

[Clarkey]

I need some confirmation on the bootloader this works on, will it work on 0A.B2 bootloader

[reddor]

same problem here as harpezoid, but when i press * + # while putting in the battery i get into "dual boot for motorola K1 By GandjaFuzz & Vilko" and i can use flash&backup to upload another firmware.
update:
this firmware worked pretty well, my phone is now running again. FINALLY.

[moto_default]

@ pvolks - I know about the new version, its not the drivers it the fone, I know it, its PDS corrupt.

@ Clarkey - U can try I have the same boot loader as yours and so far I am still in process of tryin to get the fone workin again. It should work, since once TP those patched bootloaders work.

[harperzoid]

same problem here as harpezoid, but when i press * + # while putting in the battery i get into "dual boot for motorola K1 By GandjaFuzz & Vilko" and i can use flash&backup to upload another firmware.
update:
this firmware worked pretty well, my phone is now running again. FINALLY.

Glad you got it working. Could you tell me which file I need to download and what to use to put to phone please.

[reddor]

i meant the 42.0b version. what i did before was precisely doing what was described in here (after i bricked my phone using the other tutorial on the board and had to TP it).

the things you should try:
1) power up the phone using the red key while holding down * and #, having this neat bootloader popping up on your phone's screen.
2) use flash&backup to install the 42.0b version
3) phone will turn off, followed by a white screen for approx. 10 seconds, then the phone should work normally.

hope this helps..

[harperzoid]

hehe! I used the wrong file and now I just have a white screen, can't even turn it off!
I'm only laughing so I don't cry! Does this now mean I need to do a testpoint? Seeing as this has been beyond me so far, is that something I should attempt? If not is there anyone here in the UK can fix this for a few quid?

[Clarkey]

I can fix it, i have an ultima box and can do testpoints, lets see if you can do it yourself first though eh?

take your battery out and hold *+# while putting it back in

[harperzoid]

Thanks Clarkey.
Tried that, still white screen.

[lawman4536]

I have the motrola k1 flash the wrong monster pack file as well. It all the white screen cant even turn off. stay at white screen. Cant get into falsh mode using *#power.
Anyone know how to force turn on flash mode.

Thanks
Dave

[Trickybitch]

cant force flash if its like that. You need to repair PDS/Bootloader.

[moto_default]

Yeah welcome to my world guys, please read my posts at the other RSA remove thread...I am also stuck as you guys are....so we need some major help!!

[lawman4536]

Hi,
I am novice and need help.

How to repair PDS/Bootloader ?

What do I need. Any clue ?

Thanks
Dave

[Trickybitch]

To repair PDS follow this guide: http://www.modmymoto.com/forums/show...4&postcount=46

[Clarkey]

There are 3 guys on this forum who can do a pds repair if you guys don't want to do it they are:

wineguy
hagan
Clarkey