Porting help

**Kagelou** · 03-26-2009, 01:54 PM

Hey guys! I read the guide above on creating a font, but I dont get how that guide explains porting it! It seems that its a guide on creating a font, so can someone tell me how to port one? I have the original CG4 and all the necessary programs, and this is the font I want to port to my V3xx.
http://www.modmymoto.com/forums/down...=file&id=13131
yea, I tried flashing it, but since I have a different bootloader, it keeps coming up with critical error...
Thanks in advance!

**SocaSlvr** · 03-26-2009, 04:33 PM

Read HERE.
Also make sure the end address of the cg4 is not over the assigned end address.

**Semseddin** · 03-26-2009, 06:05 PM

Hey kagelou, take a look at here

**Kagelou** · 03-27-2009, 01:56 PM

worked perfectly! =]
Thanks guys!!!

is there any way to just change the outside LCD time display font, without changing anything else???
I used Brush445, but when the time goes to double digits, there is too little space for the entire time so the "M" in "AM" and "PM" gets cut off! If it is possible to just change the outside LCD numbers and the P,A,M please tell me which font file to edit! Thanks!

**Semseddin** · 03-29-2009, 03:01 AM

No way m8 !

**SocaSlvr** · 03-29-2009, 06:42 AM

You can't use a different font but you can edit the cli skin to give it more space for the time.

**Kagelou** · 03-29-2009, 04:32 PM

ok. so how would i edit the cli skin file? would i use Skinner4Moto and do something?

**SocaSlvr** · 03-29-2009, 04:36 PM

Yeah, skinner4moto cli edition.

**Kagelou** · 03-29-2009, 05:56 PM

um, is this in the downloads section? or is tht the regular S4M?

Thread: Porting help

LinkBack

Thread Tools

Display

Porting help

The Following User Says Thank You to SocaSlvr For This Useful Post:

2 Users Say Thank You to Semseddin For This Useful Post

Posting Permissions