flashing went wrong

[tk2011]

Hi. I was flashing my V3r (R4515) but my pc crashed. Now i can't turn on my phone (not even with * + #). What options do i have?

[Dumba]

If your pc crashed, make sure that all drivers you need for RSD are installed correctly. Then force the bootloader by holding #and* while popping the battery in. If that doesn't work, keep # and * pressed while alternating pressing power on for 3 seconds and letting go for 1 second. that should sooner or later get you at least to s-blank neptune Lte2.

[tk2011]

nothing.. it's like i don't have any battery left, completely dead
I charged the battery before i flash so i think it isn't problem

[Dumba]

Just to outrule that possibility, maybe try to get your battery charged at someone elses phone or borrow a battery for a second to see what it does.

[tk2011]

Ok new developments. The phone was never dead.. i can connect it to my pc and it is recognized (not as a motorola v3). But now when i try to flash using FB3 i get a Critical Error 84 and with RSD Lite 3.6 i get a "Failed flashing process. Phone[0000]: incompatible superfile for Subscriber Unit state". RSD Lite also shows "S Blank Neptune LTE2" as the model.

Any new ideas?
i appreciate for the help

[Dumba]

S-Blank Nepyune means it has got no info on the phone. It weill need its RFDI image. If you had a backup, its in it. If you don't have a backup try to flash a stable stock MP, best to choose the D3R tested MP for the r4515 from the Download section, just to outrule that you were sticky before.

[tk2011]

i did a backup using F&B3 (in the Read Data section) but i'm getting a Critical Error 84 using it. On the other hand i tested the one you told me and i didnt get any error but in the end the phone stays exactly as it was before :\

[Clarkey]

find p2k easy tools using google, dont ask here it's warez, use that to flash a stock mp