Reviving dead phones & Repair PDS(Tutorial)

**98xploder** · 11-23-2007, 02:14 AM

if you have done the rsa to the tee, it would work. getting it recognised blank, and apply the runphone patch. that should do it.

**xwinx** · 02-13-2008, 01:17 PM

After trying to remove RSA with TP and failed, i want to remove RSA without TP.
I follow the instruction n still failed. Mt phone never boot anymore and my comp do not recognized it again.

So i try to revive it with this thread's instruction. But still i dont see its work.
This is my method.
1. Connect USB... DONE
2. Do TP... DONE
3. Connect phone battery...DONE
4. Open RAMDLR2 n connected
http://i248.photobucket.com/albums/g...2connected.jpg
5. Send Loader
http://i248.photobucket.com/albums/g...sendloader.jpg
6. Write Boot
http://i248.photobucket.com/albums/g...2writeboot.jpg
I always getting USB IO timeout.
Few times trying but still its not working.

Need some advice here. Please respond

**adminzc** · 02-13-2008, 01:34 PM

first ur posting in the wrong thread...i guess..second if ur RSA could not be removed by TP its gonna be harder to remove it without it so i would recommend u to check version u have of RAMLDR and by the way in your pics it seem u didnt wait enough so the phone ramldr says DONE!!

**xwinx** · 02-13-2008, 01:53 PM

Originally Posted by adminzc

first ur posting in the wrong thread...i guess..second if ur RSA could not be removed by TP its gonna be harder to remove it without it so i would recommend u to check version u have of RAMLDR and by the way in your pics it seem u didnt wait enough so the phone ramldr says DONE!!

Am i post in a wrong thread?

Hows to check RAMDLR version? I download it from the 1st page.
DONE? I wait for it, but i guess it never showed up.

Any other opinion?
I'll try it again then

**loykhtn** · 04-01-2008, 01:34 AM

You sir are amazing. Thanks so much! Took me a couple tries, but I realized that I simply hadn't TP'd properly to begin w!

**MasterE** · 04-06-2008, 04:31 PM

I thought this would have been Sticky already, such a useful thread

**Vishal_Baal** · 04-11-2008, 11:51 PM

I revived my phone using this guide...thanks alot...
but now i dont have dual boot, and just a white screen for boot loader...please help me get back my dual boot...

**anhvu2875** · 04-12-2008, 12:59 AM

Originally Posted by Vishal_Baal

just a white screen for boot loader

u flashed unsuitable BL !

Originally Posted by Vishal_Baal

please help me get back my dual boot...

do hard testpoint and flash removed RSA MP with Duel BL in CG18 !

Originally Posted by xwinx

I always getting USB IO timeout.

decrease USB speed and change to new ver of RAMDLD !

**Vishal_Baal** · 04-12-2008, 06:05 AM

do hard testpoint and flash removed RSA MP with Duel BL in CG18 !

Thanks alot...everything working now...thanks very much...

**diabolic53** · 04-12-2008, 01:11 PM

i'l make the flash again with dualboot included

hope this guide helped a few people

Originally Posted by MasterE

I thought this would have been Sticky already, such a useful thread

no ... they just ignored it because i argued with the moderators

just read the top of the thread

**jogelu** · 04-12-2008, 03:22 PM

I did this and worked, but now my phone dont get Network. No matter what i do it says no service? Any ideas?

**diabolic53** · 04-12-2008, 03:40 PM

it must be a software problem ... try reflashing with a diferent MP

**MasterE** · 04-12-2008, 04:18 PM

Originally Posted by diabolic53

i'l make the flash again with dualboot included

hope this guide helped a few people

no ... they just ignored it because i argued with the moderators

just read the top of the thread

Is it finished yet I'm anxious

could you also make it without RSA please

**diabolic53** · 04-12-2008, 05:32 PM

ok

) i'l make it so it has the rsa removed as well

but in the morning

couse here it is 2:32 am

) and i'm a bit sleepy

)

**MasterE** · 04-12-2008, 08:16 PM

Ill be back In a few hours then

Thread: Reviving dead phones & Repair PDS(Tutorial)

LinkBack

Thread Tools

Display

Posting Permissions