bricked rizr question

[weazle23]

ok i came across a good deal on ebay for a couple rizrs. one just needed a new screen and the other wouldnt turn on. i've fixed the one that needed a screen. but the other one i finally got to blank mode and tried a pds repair with got. but as soon as as it gets to sending ramdld to handset i get two errors and then nothing. it shows my bootcore version as 0300. i've tried ramldr_01_34a and i hit send loader and as soon as i hit write boot my phone disconnects. if anyone has had this problem or knows how to fix it i would appreciate it.

[DARKPIKASSO]

Hey there...

There's some guides post it, for liberation with out TP the Z3, check it out and see if its work..

[weazle23]

i've searched through i think all the guides. i'm stuck i s blank mode. if i try to flash it with rsd lite it says wrong superfile for handset. and if i use f&b it goes throgh the jump and sendine loader but stops at erasing unit. and got won't do a pds repair.

[DARKPIKASSO]

when you have your phone in S blank neptune, you cannot aplied a MP, youhave to do the real testpoint in the Z3 and then you can repair the pds with mstool or p2keasytool...

[weazle23]

i've tried with doing a real testpoint mstool or got still won't do a pds repair. i will try with p2keasytool. ok i downloaded p2keasytool v5.3 and i don't see the rizr listed is there a newer version that i need?

ok now i think i really screwed it up none of the programs will recognize it. and every once in a while when i plug it into the usb the green light will come on and the computer will say a usb device has malfunctioned.

[thelaxplaya7]

ive had that happen before with a v3i, try appling the tp and then connect the usb and you shouldnt get any errors then while you have the tp still grounded i would try to give it battery, im not sure how well this wud work because i was using the magic tp button with the v3i, i thought it was dead for sure thats usually what the green light means but i tried that and it worked

[weazle23]

still nothing. now i cant get the computer 2 recognize it at all. looks like maybe i need a new mainboard for it.

[amenkcool]

U need Hard TP..i have that problem like that before,Got moto still failed..Do this to make ur phone revive:
Clean n reinstall p2k driver ,open RSDlite n connect usb cable..windows will re detect Blank neptune wait until its succesfuly n ready to use.Flash fresh bootloader with RAMLDR2,ur bootloader will back again (RSD will detect s-flash neptune).Flash 0DR MP with RSD,Then do the steps in BF RSA Removal guide WITH HARD TP.. ur phone should be back normally.

[weazle23]

ok i did the clean and reinstall still nothing. the first two times i connected the usb cable it popped up and said usb device malfunctioned. then it went back to not doing anything again.