[Guide] Fixing -PH SIG ERR-

[Mad Cow]

Which version of mstools do you use? I have 8r and I don't see any option for doing a soft testpoint.

[europeansk8er]

Does anyone knows why my phone disconects every time I try to "send load" tru Ramldr2 and when I use RSD lite why it shows me S Flash Neptune LTE2? (The USB cable is conected at all times)

Does anyone know what I do wrong?

(here are some picures)

[mts]

That's because those doing wrong the second step of the manual, try again and if does not work you need to revive with Testpoin

[anhvu2875]

Does anyone knows why my phone disconects every time I try to "send load" tru Ramldr2 and when I use RSD lite why it shows me S Flash Neptune LTE2? (The USB cable is conected at all times)

Does anyone know what I do wrong?

(here are some picures)

change another USB hub and u must use behind USB hub .

[yo_alan]

I have a question... my z3 is not working, so now im going to follow this guide to repair it. but when already have fixed it again what preventions should i follow to put again a MP and make it work perfectly and not have the same error as now????

THANKS

********@hotmail.com

[CandymanMike]

please don't post your email for help. post in the forums. thanks.

[aftermath2k6]

should i use the files that are given in the guide?

[formolog]

I haven´t tried it becuase my phone is OK.
But it works!!... just read the posts

Spanish version


- The phone won´t start up.
- It only does it in bootloader mode.
- The screen is showing PH SIG ERR.

Fixing it...
Note: when I say Wait untill is Ready,
It is assumed that a message will show up.

1. Remove the SD and SIM card.

2. Use MSTools to do a Soft/Fake TestPoint. If you want to confirm, open RSD Lite and check if your phone is recognized as S Blank Neptune LTE2
(Attention: Don´t get desperate, after doing the Soft TestPoint the screen will go black and you might think it´s dead but don´t worry... it´s just sleeping.)

3. Now open Ramldr2 and press the Send Loader button. Wait untill message "Ready" appears.

4. Press the Write Boot button, select the Boot_0AC0_patch file and wait untill you phone gets detached (Not Connected). After that, your phone will be in Blank mode.

5. Remove the battery and put it back.

6. Open Flash&Backup3 and flash the Revive dead flash with RSA & PDS patch file.

7. Remove the battery and put it back.

8. Open Ramldr2 again, press the Send Loader button and wait untill it´s Ready. Now press the Write PDS button and select the PDS_Z3 file. After that, your phone will get detached (Not Connected), you can close the program.

9. Remove the battery and put it back.

10. Open Ramldr2 again and press the Send Loader button, wait untill it´s Ready. Now press the Write Boot button and select the Boot_Start_SW file. After that, your phone will get detached (Not Connected), close the program.

11. Now you can Unplug the phone, remove the USB cable.

Note: according to the creator of this guide, you will have to be in Blank mode if you want to flash your phone again.


Files are here:
M3 Mirror

Thanks to XPC21... the original creator of the guide


Warning! (By aneotoena)
Using that files you get no dualboot.
And if you get no dualboot then you need to do real TP to flash the phone again.

Files need to be modified.

Thank you for the warning

thanx

[syck]

hi guys i was wondering how to do the soft/fake testpoint with mstool 8
thanks
i figured it out and now my rizr is working again thanks for the guide

[leevjones]

where do i get MSTOOLS and
Ramldr2

[nyahbingi]

I used this method to revive my phone! Its alive but there is no sound the speker/mic is not working

How can i flash it to another MP? If so which one to use?

[CandymanMike]

where do i get MSTOOLS and
Ramldr2

mstools is warez. you'll have to find it on your own. ramldr2 should be in the download pack. you're probably better off using one of the rsa removal guides though since this one will leave you with no bootloader and you will need to testpoint to flash it again.

[Mozelite]

i have a ramdldr 2 ifrom an rsa removal guide not mine but if you want ill upload it

[joegrine1989]

where can i find MSTOOLS i cant get it anywhere?

[Clarkey]

google is your best friend