To run proxoid (don't know what steps you are using):
1. Download and Install Proxoid from the market.
2. Run Proxoid.
3. You can use 8080 as your port but usually I use something different like 7070.
4. Connect your Cliq to the PC via USB cable and ensure that the device appears as MB200 USB device.
5. Open Firefox.
6. Goto Tools -> Options -> Network Tab -> Settings -> Manual Proxy Bubble -> Under each left side line list localhost. Under each port line list port used in Proxoid on phone (in this case for consistency 7070) The last line listed as No Proxy For should auto configure itself so leave it alone.
7. On your phone check the box that turns Proxoid on.
8. Back on your PC run command prompt. Go to ADB and run adb forward tcp:7070 tcp:7070(if it doesn't auto recognize the command, change the directory to the adb tools folder and then run command). Note the fact that the numbers reflect the port we have been using in previous steps, this command is crucial as it forwards outgoing and channels incoming data.
9. Go back to Firefox.
10. And browse. That and make sure your not connected to any other networks (lolol).
P.S. I hope this helps! Oh and what version of Windows and what version of Firefox are you running AND are you on 3G, 2G, or EDGE...cuz if your on 2G or EDGE that could be your problem lol...
P.P.S. This post was made with PROXOID!!!
Last edited by jasecloud4; 03-04-2010 at 02:14 PM.
"Some people say I have issues" ~ME
"Don't Blame me I voted for Kalashnikitty"