Patching Discussion

**Aravind** · 03-24-2007, 09:22 AM

Originally Posted by joshuab

it doesnt matter
just upload the one provided by kirk after doing the seem edits
its supposed to be there but it wasnt there for me

You will need to ahve enabled dynamic prompts for the file to be in a/

**Crond** · 03-25-2007, 05:05 AM

and Change the flex name to:
GSTL7T676BD10D - .0.1.P0.1.0.P0.0.1.UE.3.10.P1.0.UE.0.3.P1.P1.UE

It isn't necessary - I had never change my flex version, and all patches works well

**kirklestat** · 03-25-2007, 07:32 AM

yes you are right. no need to change it. it just does not allow for a custom flex name.

**kirklestat** · 03-25-2007, 10:07 AM

alright. fpa patches for Airplane Mode on ABR, AER
DCR, and EOR
patches originally from Rek>pth, xmasloff, and IceMan2000.

**raydeejay** · 03-25-2007, 10:18 AM

Originally Posted by kirklestat

alright. fpa patches for Airplane Mode on DCR and AER.

patches originally from Rek>pth, xmasloff, and IceMan2000.

What is status light?

**kirklestat** · 03-25-2007, 12:06 PM

no use on L7 but you are going to activate it and then make your own dnp.prf and change the Status Light into Airplane Mode.

here's the dnp http://www.modmymoto.com/forums/atta...9&d=1174738105

**Alverick** · 03-25-2007, 12:52 PM

can it be done on ABR?

**kirklestat** · 03-25-2007, 01:16 PM

i've tried on ABR. no luck. the phone just keep restarting.

**manas** · 03-26-2007, 12:17 AM

how to use these .fpa file?

**sidhu8888** · 03-26-2007, 01:38 AM

hey kirk!wat bout r44419?

**kirklestat** · 03-26-2007, 07:11 AM

we don't know yet.

**Lajon** · 03-26-2007, 07:48 AM

how about DER?

**manas** · 03-26-2007, 10:25 PM

>for airplane mode in DCR i tried to find out the folowing in the left column of hex editor
3CFE4,3D0B8, 3D0F4,3D114,35823A, 62DA28, 62DA66,C2574C
>i tried very much, but i was unable to find 3CFE4 & two others
>what may be the reason?

**kirklestat** · 03-27-2007, 02:55 AM

to use the fpa, make a backup of CG1, CG3, CG7, and CG18. then open FB3.0.2. on the firmwares, select your backup. click on apply patches, select the fpa, then ok then click save as. you can flash the new flash file with RSD.

**Buso99** · 03-27-2007, 08:09 AM

Originally Posted by kirklestat

to use the fpa, make a backup of CG1, CG3, CG7, and CG18. then open FB3.0.2. on the firmwares, select your backup. click on apply patches, select the fpa, then ok then click save as. you can flash the new flash file with RSD.

So by making the applied said patches via FB, DCR based phones will have the Airplane Mode - am I understanding this correctly?

Thread: Patching Discussion

LinkBack

Thread Tools

Display

The Following User Says Thank You to Crond For This Useful Post:

Posting Permissions