Flashing Errors & Their Solutions

[jmoncayo]

hey guys i need some help, i ended up bricking my phone while flahsing it. I tried this SLVRicious (ACR) L7 Slvr 08.D0 monsterpack. I tried the dualboot flash and the phone died. It wont turn on again not even bootloader mode, no white screen, nothing. When conecting the phone to the computer i get unrecognized usb device. Anyway to fix this please.

All the info i got is
Bootloader 08.D0
no backup, nothing

help please

[asset]

take out the battery.when puting it back in hold down # and *.see if you get into bootloader.

[dammaud]

pleassssssssssssse help my my won't turn on ive tried this methods with usb p2k cyclone...... but it don't detect my phone can someone help me ????

[drv2500]

My original system was:
IMEI:R^7Zedit please do not post IMEI
Technology: Quad-Band GSM
Software: R4513_G08.B7 DCR_RB
Flex: GSTL7T676BD10D-2.0.1.P0.01.UE3.10P1.0.UE.0.3.P1.P1.UE
Bootloader version: N/A
DRM version: 0101
Bound Signature: Allowed

I accidentally flashed with
R4513_LS_dragoEOR_uirevolutionmixDRM_candaraFont.s hx
(I thought it was a DCR and not realized it is EOR).

Now when I press the power button it only flashed a blue light then went off. I can force it the loader screen by "*" + "#" then power. It will display:
Boot_loader
08.D0
sw.version: R4513_LS_dragoEOR_RB
OK to Program
USB Transfer mode

I have tried several Monster Packs,
MM_Mod2_DCR
MM_Mod_updated
R4513_G_08.B7.DCR_RB_PDS017_LP004B_DRM0101_JPJAVA_ G_08_L7_05_01_09R_GSTL7T675TG179_1FF.shx
etc.
I tried flashing them with F&B3.06 and RSD Lite 3.3. It will erase and re-program without any error. But the result is the same (won't turn on, when forced into loader and it shows R4513_LS_dragoEOR_RB).
Before I flashing I used F&B3.05 did a backup. I tried to restore the firmware with the backup file. The result is the same. I noticed the backup does not have CG2. I don't know why, I thought the backup should back everything up.

I have spent several days to read most of the threads and instructions on this sites but still not able to fix my problem.
Pleas help. Thanks!

[asset]

refer to my answer here.and please do not double post again.

http://modmymoto.com/forums/showthread.php?t=225561

[modl7]

hi i have the following problem i tried to apply some patches and my phone messed up.
now i gave an error in flash&backup that says that doesn't allow me to restore mi CG1
the phone passes the bootloaders but when the salute message appears it reboots and you have to take out the battery
the p2k easy tool gives this error: ERROR: Please make TESTPOINT on phone for this model!
you can get to the bootlaoder
i had powerful L7 acr
please help me i am frustrated

[manas]

Connect your phone to RSD lite3.0 and flash any ACR or DCR stock firmwares from THIS page

If you get code sig error, just remove RSA from that stock firmware and flash by RSD Lite3.0

If you still get error, remove RSA and apply PDS patch for that particular firmware and flash by RSD Lite3.0

[modl7]

Yes you are the best manas it's alive again i'm so happy thanks a lot

[rmps]

Hello. I've got a dcr&08.D0. Every time i try to flash it, i got a critical error 80, and Error erasing subscriber unit in rsd lite No matter what i try to flash. Help me please...

[GirlaHolic]

i had a slvr L7 and i flashed with bootloader 08.D0 and i flashed Revolution EOR MP on it..I could not receive any signal so i tried flashing it back to a different f/w..but it did not work and now it is givin me ERROR 0x1FE...What Should I DO??? rsd lite. easy tools and f&b 3 is not workin anymore..it can't seem to send the loader...

SLVR L7
Boot LOader
08.A0.
SW Version:
R4513_REVOLUTION_E0R

PLZ ANSWER AS SOON AS POSSIBLE!!!

[indycafe12]

i have brick my L7 phone . i has flash with monster pack with seem patch update after that my phone away display blink light all the time. i can press * and # but can't connect to my computer, it tell cannot reconize and in device manager in serial bus port it tell unknow port. i have read in all webboard and search and it tell me to testpoint. and i don't have tool to do it . could you halp me what to do.
Phone : L7
SW : R4513 ACR
BL : 08.DO
Thank for every answer

[SocaSlvr]

i have brick my L7 phone . i has flash with monster pack with seem patch update after that my phone away display blink light all the time. i can press * and # but can't connect to my computer, it tell cannot reconize and in device manager in serial bus port it tell unknow port. i have read in all webboard and search and it tell me to testpoint. and i don't have tool to do it . could you halp me what to do.
Phone : L7
SW : R4513 ACR
BL : 08.DO
Thank for every answer

can you access your bootloader screen
if yes then just flash a full mp

if not open rsd and then plug in your phone and see if its recognised

[indycafe12]

can you access your bootloader screen
if yes then just flash a full mp

if not open rsd and then plug in your phone and see if its recognised

i can access bootloader screen but i can't flash mp coz i can't connect to Rsd lite 4.1 , f & B 3.07, P2k easy 3.9 windows tell doesn't reconize usb serial bus.

[SocaSlvr]

clean up drivers and reinstall
insert cable while in bootloader mode and open f&b

or try another usb port

[indycafe12]

thank for your help Mr.SocaSlvr and i will try to do it and i will feedback to you