Flashing Errors & Their Solutions

**SocaSlvr** · 02-27-2009, 01:29 PM

you probably had a stick firmware in the past
apply pds patch

**007dynamicvishal** · 02-27-2009, 01:50 PM

Originally Posted by SocaSlvr

you probably had a stick firmware in the past
apply pds patch

I applied PDS patch before flashing killermoto, but it won't work

should i???
1- apply pds patch first on my phone, save it, and then flash killermoto

or

2-flash killermoto and then apply PDS

PLS guide me I'm trying it again NOW

I used this guide to make the PDS patch: [Guide] Patching CG1 / Applying fpa files

Is this correct????????

**SocaSlvr** · 02-27-2009, 02:16 PM

yes
apply to mp before flashing

**007dynamicvishal** · 02-28-2009, 03:17 AM

Thanks socaslvr, I'm done

But after flashing KIllermoto after patching, I can't access all its features like airplane mode, night mode, blacklist callers etc..

How can I access that????????

**SocaSlvr** · 02-28-2009, 09:45 AM

what do u mean?
what have you done to the mp?

**artjay** · 03-09-2009, 08:03 AM

tnx for it..but my phone is still not being read by my pc..although the boot loader screnn can be seen..but my cp is battery low.

**Aravind** · 03-09-2009, 08:30 AM

Originally Posted by artjay

tnx for it..but my phone is still not being read by my pc..although the boot loader screnn can be seen..but my cp is battery low.

charge your battery then!

**artjay** · 03-09-2009, 08:35 AM

hehe..will it work if i charged it

**SocaSlvr** · 03-09-2009, 01:49 PM

well lets put it this way, you cannot fix it unless you get it charged

**oktopod** · 05-19-2009, 08:07 AM

I found a solution to my problem as I was typing it, so I wanna share with others.

Solution was that I found a .shx somewhere on the internet using google, keyword was my original software version. That flash saved the day. I flashed all CGs with RSD lite 3.0.

Problem was:

I'm stuck in bootloader mode after flashing with a stock flash I found here.

BOOT LOADER
08.D0
SOFTWARE VERSION
R4513_G_08.B7.DER_RB
PHONE CODE SIG ERROR:

I had 08.D0 R4513_G_08.B7.5ER_RB originaly. Now I cannot flash my backup or any MP. I've tried with f&b 3.06 and RSD lite 3.0. RSD finishes the job with my backup, but no results. F&B hangs at CG1. I've also tried to flash with RSD lite and then all except CG1, and also CG1 only but no luck.
User SocaSlvr told me to "flash a rsa removed pds patched mp" I found one here but no luck.

It's like I'm stuck with this CG1 pack (firmware) right?

No, solution is that using google i found a file named R4513_G_08.B7.5ER_RB_PDS015_LP0038_DRM0101_JPJAVA_ G_08_L7_06_00_01R_SE5769AXXH20F2_1FF.shx
and with it, it had a
R4513_G_08.B7.5ER_RB_PDS015_LP0038_DRM0101_JPJAVA_ G_08_L7_06_00_01R_SE5769AXXH20F2_1FFRAMDLD.smg

So I'm saving these files as my factory backup if needed. I'm happy that my fone works!

So heres a new question...since I havent backuped my phonebook for a few days, and I met this chick meanwhile, since I wasnt able to flash my backup, CG1 hanged, I dont have her number, can I now safely flash CG2 only or whichever CG has names and messages?
I'm so scared of flashing now....wanna be much more aware of possible problems, and allways have a COMPLETELLY FULL batery

**chaddyB** · 05-19-2009, 10:31 PM

help meee!!! pleaze anyone......a tried Flashing ma L7 and i was flashin it wit a lower boatloader and a some error code came up and after that the fone went dead.....it cannot be turned on in anyway........

wat should I do????????

help meee!!! pleaze anyone......a tried Flashing ma L7 and i was flashin it wit a lower boatloader and a some error code came up and after that the fone went dead.....it cannot be turned on in anyway........

wat should I do????????

**angelroche2000** · 07-02-2009, 10:53 AM

Guys help me...
I unfortunately flashed a DRM file of E398 and my mobile is SLVR L7...
the phone is dead now... tried booting in bootloader mode(#+*+power down) no use at all... and instructed in this thread, i used P2K Easy tool also, the phone is detecting as "S Blank Neptune LTE2", after sometime when i clicked the "Click "Do Selected Jobs", in a minute you should see messages like "repair ok"... it shows ERROR...

mine bootloader is 08.D0
S/W version: R4513_ACR

guys please help me....

**jaykay** · 07-02-2009, 12:30 PM

have you selected PDS repair as the job?

**angelroche2000** · 07-02-2009, 11:38 PM

Originally Posted by jaykay

have you selected PDS repair as the job?

yes i have selected PDS repair as the job... please help me guys...

i took the mob to the SVC, they told the main board is gone which will cost 1500Rs/-
is there any way to recovery my phone???

help me guys...

**elleFX91** · 07-03-2009, 01:10 AM

did you remove your battery while doing the PDS repair?

Thread: Flashing Errors & Their Solutions

LinkBack

Thread Tools

Display

The Following User Says Thank You to SocaSlvr For This Useful Post:

Posting Permissions