RSD lite 3.2 failed flash

**jaykay** · 10-06-2007, 01:09 PM

Status box- failed flashing process. phone (0000): Incompatible superfilefor subscriber unit state. (0x430703A).phone conected. the rest of the story is a some gave me the phone and said it had a virus(ha). when i took the back cover off, some one attempted testpoint.... the only thing i have to go by is the sticker that was on the board cover and it was worn but i could make out a 25r. but my ? is about the message in the status box using RSD lite. is this telling me that the stock files i'm trying to flash are not from the provider and the phone is locked????

BF · 10-06-2007, 01:13 PM

Originally Posted by jaykay

Status box- failed flashing process. phone (0000): Incompatible superfilefor subscriber unit state. (0x430703A).phone conected. the rest of the story is a some gave me the phone and said it had a virus(ha). when i took the back cover off, some one attempted testpoint.... the only thing i have to go by is the sticker that was on the board cover and it was worn but i could make out a 25r. but my ? is about the message in the status box using RSD lite. is this telling me that the stock files i'm trying to flash are not from the provider and the phone is locked????

Hook your phone to RSD Lite and see if it says 'S Blank Neptune LTE2'

**R^7Z** · 10-06-2007, 01:15 PM

i never had much success with RSD lite flashing my .25r when it was .25r always used f&b3 and didn't have a problem...possibility that you were attempting to flash something other than .25r since it is sticky as hell. only good solution was to flash completely over to r4513.
Q what does RSD lite detect your phone as?
lol@bfielding... same question i had

**jaykay** · 10-06-2007, 01:17 PM

S blank neptune LTE2, i need to tell you that the i cannot see the screen in bootload mode, but if i try to flash it SW update does come on the screen.

BF · 10-06-2007, 01:20 PM

Originally Posted by jaykay

S blank neptune LTE2, i need to tell you that the i cannot see the screen in bootload mode, but if i try to flash it SW update does come on the screen.

You can't flash a blank phone. Find P2K Easy Tools 3.9, only version 3.9 and do a 'Full PDS Repair Zone', then force bootloader and flash it.
You can only flash PDS Patched R4513 after that.

**R^7Z** · 10-06-2007, 01:21 PM

your in blank mode...you should be able to flash a full MP to it(i did it once before...), hopefully it not the dreaded 0A.52 b/l...
Q have you attempted a PDS repair?

**jaykay** · 10-06-2007, 01:44 PM

ok, i'm guessing y'all are thinking this is a 25r too, but what bootload ver??? if y'all want to move this thread to one of the 25r discussion threads, please do so. I have been using y'alls threads and have good copies of p2k easy tools, F&B (Registered) and about 20 days left on got moto. i'm just looking at this as a challenge and havin fun!!

and to answer the last ?'s, yes, all attempts for PDS repair have failed or locked the programs up.

BF · 10-06-2007, 01:48 PM

Originally Posted by jaykay

ok, i'm guessing y'all are thinking this is a 25r too, but what bootload ver??? if y'all want to move this thread to one of the 25r discussion threads, please do so. I have been using y'alls threads and have good copies of p2k easy tools, F&B (Registered) and about 20 days left on got moto. i'm just looking at this as a challenge and havin fun!!

and to answer the last ?'s, yes, all attempts for PDS repair have failed or locked the programs up.

do you have GOT?

**jaykay** · 10-06-2007, 01:51 PM

yea, more than 20 days left.

BF · 10-06-2007, 01:56 PM

Originally Posted by jaykay

yea, more than 20 days left.

do the PDS repair with got and the 0a.20 profile

**jaykay** · 10-06-2007, 02:05 PM

bootcore ver on handset 0300
Sending RAMLDR to handset
RAMLDR Started ok in handset
Read flash type and ID
Flashchip ID detected:0X00898810
Write PDS on flashchip
Error 20000806
Error 20050205

during entire process, screen on phone stays blank, dark...nothin

BF · 10-06-2007, 02:11 PM

Originally Posted by jaykay

bootcore ver on handset 0300
Sending RAMLDR to handset
RAMLDR Started ok in handset
Read flash type and ID
Flashchip ID detected:0X00898810
Write PDS on flashchip
Error 20000806
Error 20050205

during entire process, screen on phone stays blank, dark...nothin

just keep trying, somtimes errors occur

**jaykay** · 10-06-2007, 02:18 PM

ok, i've gotta charge my battery and i'll keep tryin the pds repair and nothin else.

**R^7Z** · 10-06-2007, 02:23 PM

Q does got_moto detect your phone? i had problems with the client sometimes it wouldn't pick up my phone so what i had to do was delete the client and then re-download it of course restart the computer if all else fails

**jaykay** · 10-06-2007, 02:37 PM

yea, it's acting like it's connecting just fine, got the connect, disconnect sound from the pc and the connected / not connected showing in sync bottom left corner. R^7Z, where/how can i download the OA.52 bootloader, PDS copies for the 25r? wait a minute and i'll make a list of what i've got so far.

Thread: RSD lite 3.2 failed flash

LinkBack

Thread Tools

Display

RSD lite 3.2 failed flash

The Following User Says Thank You to BF For This Useful Post:

The Following User Says Thank You to R^7Z For This Useful Post:

The Following User Says Thank You to BF For This Useful Post:

Posting Permissions