Critical Error 011B

[nizamsd2000]

Hi frnds i got a big problem i flashed my L7 for many times and got good results but the
last time when i flashed i stuck on the way now my mobile has only bootloader nothing else. only the way i can power off the mobile by removing the battery when i put the battery automatically i comes to bootloader. when i trieng to write data using flash&backup 3, it showing critical Error 011B what i will do? kindly help on more thing can i charge my mobile in bootloader mode?

[Gagan_rocks]

Nope u cant charge ur fone in bootloader mode

BTW wats ur bootloader skreen displaying ?

[nizamsd2000]

Thanks for ur great kindness to notice my problem. the screen alwasys showing the bootloader version and 'OK to Program Connect USB Datacable' when not connected to PC and 'Ok to Program USB transfer Mode' while connected to PC.

[Gagan_rocks]

i mean tell ur Bootloader and S/w Version

and also tell if its displaying any errors

[nizamsd2000]

Boot Loader 08.D0.
SW Version:R4513_G_08.B7.DCR_RB
normally not showing any error but when i trying to write firmware, the screen suddenly going to Critical Error 011B.

[Gagan_rocks]

Try flashing with RSD lite 3.0

Flash the STOCK DCR firmware
get it from D/L section

[nizamsd2000]

Thanks, can u give me links for that tools..

[Gagan_rocks]

Jus Google up for RSD Lite 3.0

and heres Stock DCR MP

http://www.modmymoto.com/forums/down...o=file&id=2131

[manas]

Use F&B3.0.3 or higher or RSD Lite3.0
use another USB port while flashing
if you still get critical error, reinstall p2k drivers

[nizamsd2000]

hello sorry still i have same problem. i tried it in three PCs with fully charged battery. once the programs(flash&backup3 and RSD lite 3.2) accessing to the memory the mobile screen showing 'critical error 011B' and disconnecting from the PC after little time its coming back to boot loader stat and getting back the connection with the PC. Also when i sending RQVN command from the Flash&backup also having same problem.

[living_sword]

hello sorry still i have same problem. i tried it in three PCs with fully charged battery. once the programs(flash&backup3 and RSD lite 3.2) accessing to the memory the mobile screen showing 'critical error 011B' and disconnecting from the PC after little time its coming back to boot loader stat and getting back the connection with the PC. Also when i sending RQVN command from the Flash&backup also having same problem.

try with a different USB cable. and use the USB port at the back of the CPU. use flash&backup 3.0.6.

[nizamsd2000]

Hi frnd, i tried with different cable also now i tried with Smart_cyclone_P2K tools to flash the firmware then i got below log on the program progress window.

Processing input file:
Processed 8 codegroups
Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Sending RAM loader ...
ERROR: FLASHCMD read error
Error during post-JUMP commands.
Error while flashing RAM loader, aborting.
ERROR: Flashing failed

[living_sword]

Hi frnd, i tried with different cable also now i tried with Smart_cyclone_P2K tools to flash the firmware then i got below log on the program progress window.

Processing input file:
Processed 8 codegroups
Connecting to phone ...
Connected to: 'Motorola Flash'
Connected OK
Sending RAM loader ...
ERROR: FLASHCMD read error
Error during post-JUMP commands.
Error while flashing RAM loader, aborting.
ERROR: Flashing failed

did u use the USB port at the back of CPU like i suggested ?

[nizamsd2000]

yes dear frnd..

[living_sword]

what file are u trying to flash ?