MEM_MAP Blank Service Req'd

[.:RaDeK:.]

Hi. My phone L7 is bricked.
On the sceen is :
R4513_G_08.B7.DAR_RB
MEM_MAP Blank Service Req'd

OK to program
Connect USB
Data Cable.

What I did?
I repaired PDS via font L7e.
I can't flash any MP. I tried flash using RSD , f&b, p2k easy tool etc even Motorola updater .
I tried flash dualboot but not works...

[jaims009]

Hi. My phone L7 is bricked.
On the sceen is :
R4513_G_08.B7.DAR_RB
MEM_MAP Blank Service Req'd

OK to program
Connect USB
Data Cable.

What I did?
I repaired PDS via font L7e.
I can't flash any MP. I tried flash using RSD , f&b, p2k easy tool etc even Motorola updater .
I tried flash dualboot but not works...

its happens to me also , i fixed it by flashing my backup usinf F%b 3.07 (conected via rear usb , front usb shows error in flashing at this stage )

[.:RaDeK:.]

I did some steps and now phone show Phone sign error:

In my opinion need flash stock MP AER for BL 09.02 . But I can't find

[alvin14]

DId u do PDS repair and everything correctly...
In P2K easy tool when u select the repair bootloder, unselect it and select full pds and bootloader repair... Had that same problemm. Can u give details of all what u did...

[rafalinda]

Try flash Yuet for l7

p.s. Ja bym przeflaszował yuetem potem znowu font,naprawa i wgranie 1ff

[jaims009]

reffer this thread

http://www.modmymoto.com/forums/showthread.php?t=21755

[.:RaDeK:.]

My history. The phone itself broke. I could not force BL mode... After some modification succeeded run BL mode. I tried flash using backup but flash was filed.
During flashing, raml couldn't be sent. I did repair pds via font L7e but nothing...
I repaired PDS using mstool8 and after a I could flash any CG but no CG2 (flex).
I tried flash using CG1, 3,7,18 and succeeded , after i flashed CG2, 4, 15 also succeeded. But the phone not works. I tried flash using FF but the same problem that previously but changed error on BL to Phone sign error:

@rafalinda which firmware is to repair?
@rafalinda który soft jest naprawczy? Bo znalazłem kilka od Yueta.

//edit

After flash MP by Yuet I can upland any MP but phone every time show Phone sig error :/

[rafalinda]

Try to write Yuet 3.2 or 1.8 version / Spróbuj wgrać wersję 3.2 bądź 1.8. (Możesz zrobić taki myk że przy kasowaniu pamięci
odepnij telefon od komputera, jak Ci wyskoczy Code croupt powinien chyba wstać)

[.:RaDeK:.]

Full success . L7 alive

What I did? I flashed phone using MP byYuet.
Then a few times uplauded my bachup. A few times repaired PDS and my phone works

Thanks for all

@rafalinda dzięki, nie wiedziałem że ten soft od Yuet'a jest taki zbawienny, masz u mnie piwko albo dwa

[davell999]

my motorola rokr e8 shows me mem_map blanks service required.... i flashed the firmware (nik_stallion_pro+ by nihil007t. it worked... flashed in the cg31_for_norsa_06.a3 0r norsa 06.05 bootloader it worked then i flashed the norsa 06.a3 it didnt boot then i tried the 06.a5 it didnt boot. i tried 06.aa then it showed me the mem_map blank service required... can help me please

[zedbra]

force bootloader and try flashing your backup

[Pzyduck]

[MENTION=3116767]davell999[/MENTION] Flash your bootloader noRSA for your bootloader, then install a stock firmware.

Please post in his section and do not revive old topics.


CLOSED