Signal Issue

[lito_sanchez_]

HOw can I improve signal on SLVR L7.... am getting problems with the sigal...for example my mom phone (Z3) that i have mod by me have good signal, mine not in my room....the only thing that i dont knopw how to mod is signal improvement...can somebody help me in this????

[OCM]

make network settings fast and try put ACR firmware

[lito_sanchez_]

Dude i have made quad band with Yamp program my soft is acr and nothing i want to know if there is a way to iprove signal.....

[OCM]

then I'm not sure, a more experienced modder should be able to answer sorry...

[SocaSlvr]

you can use a program called radiocomm i think
search yuetblog about it
it envolves saving the good reception from a good reception firmware then replacing it with your currect firmware

[ktm_kannan]

you can use a program called radiocomm i think
search yuetblog about it
it envolves saving the good reception from a good reception firmware then replacing it with your currect firmware

is it possible...??
could you elaborate please...

[SocaSlvr]

i never did it but there's something about it in yuetblog
search google for it
as i dont think i can link you to it
look down the right side of the page and you will see it somewhere there

[ashlads]

i think radiocomm is only for e6 n ming...

[SocaSlvr]

well there was something on yuetblog about it for v360
so it should work for l7 to

the only thing is
that acr is supposed to be the best for reception
so this method may not be effective unless you find a firmware where you get better reception

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

heres what yuet says

How to improve network reception
We found some firmwares have better reception than others. This is a guide show you how to import the network signal settings from one firmware to another. I haven't verified the effectiveness of this method, as I live in a city where cell phone reception is good everywhere. If you experience bad reception, you may want to try these steps.

Tool you need:
Radiocomm

Steps:

1. flash your phone to a MP which has better reception;

2. connect your phone to computer via USB;

3. start Radiocomm, select menu "Features", then "NV / SEEM";

4. select the option, as shown in the screeshot, for the fields "Product", "Command Type", "Options", "Read Options" and "Compare to File".

5. click action "Read";

6. after reading, click "Save" and save as a NVM file; close Radiocomm;

7. flash your phone to the MP with worse reception;

8. connect your phone to computer via USB;

9. start Radiocomm, select menu "Features", then "NV / SEEM";

10. select the option, as shown in the screeshot, for the fields "Product", "Command Type", "Options", "Read Options" and "Compare to File".

11. click "Open", then select the NVM file you saved in step 6;

12. after opening, click action "Write"; close Radiocomm;

13. now the phone should have better reception.

[OCM]

i don't think it will get any better than ACR

[ashlads]

so this means that as acr is the best....then there will be nothig better than the network in an acr firmware(uptil now....lol)

[OCM]

yeah, pretty much

[lito_sanchez_]

ok i did....and it works good...the mps both acr, one of those was without signal, so wat i did was to apply the mvn file with best reception to the firm that was witout signal and it works terrific...all was good thanks..

[SocaSlvr]

glad to hear you got it working even others thought you had no hope

[naufil]

there are also antennas available that can be attached to the phone these also increase the signal reception quite a lot