Help me cant start bootloader

[juanjosanv]

Hello Im new to this forum and I wanted to know how can I solve this problem. I have a V3 that works perfectly but I cant start the bootloader. I press * then # then red button then green but still it just turns on the keyboard. I wanted to flash but you cant do it unless you are on bootloader mode. Or is there another way?? How can I solve this??

Also how can you mod the text that appears in the outside small screen??

[Dumba]

All three buttons simultaneously.

[alaminok]

PROCESS TO SEE BOOTLOADER VERSION----
remove your battery.
wait for 5-10 secs.
replace your battery.
then,
press * # altogether first.
Keeping it pressed, press red power button altogether for sometime.
A black screen will appear with info.
Post the info here.

[jthomas5150]

I am also having the same issue. I am able to get info by pressing *#9999#. But I can't get into the bootloader screen...

When I press # and * together, and then press the red power button, the buttons just quickly light up, then go off. I have tried over and over... I have also tried all three buttons at the same time along with removing the battery.

Any ideas?

Thanks!

[alaminok]

OK.
Is flash and backup recognizing your phone when connected to PC ?
Then take a backup. (CHARGE FULL BATTERY)
Is rsd lite recognizing your phone ?
If yes , then flash with an unlocked stable MP.

.If it is not recognizing, then POSt.

[jthomas5150]

I just installed apristel's NEW premodded MP using Flash&Backup. Same thing. I noticed when Flash&Backup was programing the phone, the bootloader was 7.0E on the phone. I don't know if this helps. Or if I should be worried since the phone seems to be able to do everything else...

BTW, I was able to get into the bootloader menu once. This was before I flashed to Evil MP using Flash&Backup...

Just flashed with RSD Lite and same thing... Is it because my BL is 7.0E?

[Dumba]

You are aware that the Bootloaderscreen often does not show with BL07.D0 and 07.E0. The screen just stays dark. But with a bright light you may seethe writing on it. It does not matter, you can check the Bootloader status anytime with RSD Lite. The onscreen message is not important.

[jthomas5150]

Wow! That was it! I saw it under the light. It was really, really hard to see. You are helpful as usual. Thanks!

[mototheme]

V3 or V3i?

when i BL my phone i can hardly see the info but i press *# power; here is it

s/w:

R374_G_0E.42.0CR

flex ver.:
SE8615MBXXH1121-3.0.8.3.2.C.0.H.10.0.1.0.0.0.7.6
1.4.1.5H.0

and

- can i have the updated new flex? coz i want to try flash my phone..what should i need to post

[Dumba]

V3, regular, R374, flex is fairly new, needs no upgrade.

[mototheme]

sweet... thanks a lot..