After *unlocking* my power button does not work

**alex8t9** · 10-31-2007 10:16 PM

nor do I see my battery meter...

HELP!

thanks

**Dohs** · 10-31-2007 10:27 PM

try flash it back with the same MP. MP @ available @ download link

**alex8t9** · 10-31-2007 10:30 PM

m downloading a MP right now, :

R374_G_0E.42.10R_A_PDS005_LP0039_DRM0001_JPJAVA_G_ 0E_V3_01_10R_GSMV3XXT677GA193_1FF.shx

i hope it works, if not then i have to keep my phone always on.

Thanks,
Alex

**Dohs** · 10-31-2007 10:59 PM

just keep it a try

**alex8t9** · 10-31-2007 11:03 PM

ok i tried it, Power off button does not work still, and there is no battery meter. (if i go to phone status and battery it shows 0)

help! my original S/w version was:
R374_G_OE.41.C3R_B
and im running Rogers service in Canada...

Thanks!

**Dumba** · 11-01-2007 04:59 PM

Happe4ns at times. First fix would be the keypad fix flex from the downloadsection under other files. And most often solved by taking the battery out and then rebooting your phone. Which is scary because you don't kbnow if you get it back, hmmm. In case it gets stuck you can always start it with forced bootloader, which is # and * and then popping the battery back in while already connected to the PC via USB. Sometimes that you have to do a few times but it will always work when the PDS isn't in bits, as it isn't in your case, the phone still works, lol.

**AlucardArg** · 11-01-2007 08:12 PM

Oh F*CK! Now I have the same problem as Alex... I need the phone working for tomorrow morning!
I tried flashing a customized font, it got "bricked", I recovered it using a backup LP. But now the Red button doesn't work, nor I see the Batt Meter.
Now, the BIG PROBLEM is that it doesn't get recognized by the PC! Therefore, I can't flash anything! Connecting the batt charger doesn't do anything either...
Any ideas???

NVM, I created a new th about my problem
http://www.modmymoto.com/forums/showthread.php?p=420962

**wine_guy** · 11-01-2007 09:13 PM

@ AlucardArg, you're going to have to try taking the battery out for a few minutes. Your phone should start back up fine.

**alex8t9** · 11-01-2007 09:33 PM

you know what happend, i got it working by mistake. I got out of my car and the phone dropped a good 4 feet onto the pavement. After the impact it was not working, so i took out the battery and moved it around. That got it working... Try dropping it and playing around with the battery (it saved my V3)

**AlucardArg** · 11-01-2007 09:52 PM

you see? sometimes, gravity IS you friend...

Thread: After unlocking my power button does not work

LinkBack

Thread Tools

Display