Lost Noob needs help

[raildog]

Hi everyone. I let a friend try to mod my phone and he said there was a power failure when it was hooked to his computer. Now all it does is light up the keypad when the battery is inserted. he basically handed it back and said nothing. Dumb $%*&$#@% On RSD Lite 3.3 it reads N/A on everything. I know from the "friend" that it had the following because he modded it once before R374_G_OE.42.09R_MXLP0001_GSMV3MXCIN01NAOF5
bootloader 07.DO and reflashed before with GTMV3XXOOOAALVOC3

Can someone please tell me how to fix this, or what to download to try to fix it myself? Thanks in advance.

[__susanu__]

start your phone in bootloader mode and flash a stock MP get it from the download section

[raildog]

RSD Lite 3.3 says model blank when I flash it process fails. when I try to go to b/l mode it never comes on and the keypad never goes out. am i doing something wrong?

[__susanu__]

do you mean you cannot start your phone in bootloader mode??
and rsd lite reconized your phone like S BLANK NEPTUNE

[raildog]

Yes it wont start in b/l mode the keypad lights up as soon as the battery is inserted and stays on. Whenever i connect RSD the Model says S Blank Device properties;
IMEI... N/A Technology... N/A Softwars version... N/A Flex version... N/A
Bootloader version... N/A DRM Version... N/A Some of my problem is I dont know what half of this stuff means. The guy that was working on it just left me hanging....

[wildwild]

Try pressing the three boot loader keys and insert the battery at the same time.

It's a little bit tricky but that was the only way to get to the BL screen on one of my phones.

Good luck

[Dumba]

Do you have a backup? If so. then flash the RFDI image from the download section, (somewhere under other flashes for v3) and follow that up with your full backup. Sometimes you have to flash those a few times before they take. Then , if the PDS stays currupted, you need to repair it using p2k easy tools 3.9. In case you don't have a backup, you can do the same just using a stock MP after and the PDS repair might require a Testpoint.

[raildog]

Ok I'll try these solutions and be back on later. Thanks alot everybody.

Ok I got RFDI image loaded but I don't have a backup. This may sound dumb but how do I tell a stock mp in the download section? I realize the modded ones listed but are the ones that are listed like R374_G_0E.42.0ER_PDS005_LP002E_DRM0001_JPJAVA_G_0E stock?? Thanks