Flash Radio No Power

[xelapr]

After flashing this radio (signed-76XXC-63805041-SDCBALUM) to my cliq xt after flashing (signed-j_r0dd.theofficial.v1.5) the phone does not power up. Since it does not power up when I open RSD Lite so I can bring it back to life flashing this sbf file (Modded-att-motus-viper-0.13.37_SECURE_PRODUCTION) or this one (secure-MB501_0.12.11_1.32.20-supermonster-customer) i can't do anything because it doesn't show nothing in the device properties. Is there another method I can access the phone? or I am screw up. I have search the forum and google and can't find any king of guide or method. Thanks in advance for your help.

[phoenixsong6]

It doesn't turn on (as in the screen stays black) or is it stuck on the moto logo?

[mastermind278]

[MENTION=3225170]Xel[/MENTION]epar - It seems like you flashed a Cliq Radio not a CliqXT radio. To make things even once again worse is that the ROM you flashed isn't for the CliqXT and without changing a few things can very easily brick the touchscreen.
Both are different phones. I have the 5041 radio posted somewhere as well as various CliqXT roms. You also do not need the 5041 radio for Android 2.1.

As for the SBF again one that you mentioned is for the Backflip (Motus) while the other is for the CliqXT(MB501).

So at this point you've thrown Cliq and Backflip SBF files to a CliqXT. It might just be bricked... Honestly it's really hard to brick this phone but throwing things that don't belong to it can cause it. There is a debrick thread here you might want to consult though at this point I am uncertain it will help: [UN-BRICK] Testers Needed!

[xelapr]

It doesn't turn on (as in the screen stays black) or is it stuck on the moto logo?

It doesn't power up at all. No blue screen no black screen.

[MENTION=3225170]Xel[/MENTION]epar - It seems like you flashed a Cliq Radio not a CliqXT radio. To make things even once again worse is that the ROM you flashed isn't for the CliqXT and without changing a few things can very easily brick the touchscreen.
Both are different phones. I have the 5041 radio posted somewhere as well as various CliqXT roms. You also do not need the 5041 radio for Android 2.1.

As for the SBF again one that you mentioned is for the Backflip (Motus) while the other is for the CliqXT(MB501).

So at this point you've thrown Cliq and Backflip SBF files to a CliqXT. It might just be bricked... Honestly it's really hard to brick this phone but throwing things that don't belong to it can cause it. There is a debrick thread here you might want to consult though at this point I am uncertain it will help: [UN-BRICK] Testers Needed!

I saw that thread but since RSD Lite doesn't show no info of the devices a can't flaah using that method. Is it possible flashing using another method. Or I just lost my phone? Thanls.

[phoenixsong6]

If powering up your phone while holding down menu button doesn't do anything, you're out of luck

[mattkun]

It doesn't power up at all. No blue screen no black screen.

The only way to recover from this is using a JTAG cable in your phone PCB. think that's just it, but I cannot confirm that, since my phone came back from warranty with a note from their techs saying that the board from my CXT was defective.

When I tried to flash a new radio before that mess happened, i didnt noticed that the file was for another phone. so, I got stuck on the flashing progress of the radio firmware. When i turned the phone off, it never turned on again. so, mailed it to motorola.

And I think you should too. just sayin' ;P

[Double0EK]

ya..sad to say that if you cant get into the blue 'Fastboot USB INIT' screen then you are SOL.

[celsofranco]

hello all, in my case it stucks in motorola logo screen... what shall i do? is there any chance of fixing it?

[DJGHOSTS3V3N]

Well, turn off the pphone, and turn it on hitting power+menu and flash a SBF file.

Sent from my Nexus S using Tapatalk