The ultimate bricked cliq :( please help

[H3XAPL3X]

Hey there guys ! I'm pretty savy with phones, but this one has me stumped ! So i flashed 2.1 onto my cliq right.. and well i got everything smoothly running, and i got VISONary on there as well (The one click root). EVERYTHING WAS WORKING SO SMOOTHLY, AND SUPERUSER WAS RUNNING PERFECTLY !!! Now here's where i made the mistake : i downloaded rommanager.. thinking it was compatible. I flashed the recovery, then made a back up of my current rom just incase. While in the "Making back up rom" process, my phone crashed. Now it's soft bricked.. If i plug it into the wall charger, it tries to boot, loops twice then goes into the blue bootloader screen telling me about the security off and blah blah (no access to my phone what so ever).. how ever when i connect to my pc via the same cable, my phone sits there with the blinking white LED light, and is not responsive. My battery is fully charged, and well it just kinda sucks. I have access to the recovery if i plug it into the wall charger, but i tried formatting EVERYTHING and still no dice. Thats probably how i got to the corrupt bootloader screen.. whoops :$ anyways, help would be greatly appreciated, thanks mobmymobile !!

[Double0EK]

Pull the battery
Put back in but..
Before turning it on
HOLD Menu
While HOLDING Menu click the power button
If the phone goes to a BLUE Screen that reads Fastboot USB INIT on the bottom then you can save it using RSD Lite

Sent from MB200, on CRACK, Using Tapatalk!

[H3XAPL3X]

no dice, i already tried that, the only way i can access my phone is if it's connect to a D/C power source (anything but my computer). So it will boot into bootloader like you mentioned above, but only if connected to a power source (wall charger)

WAIT success log !!!! :

-Plugged phone to D/C souce
-Booted into moto bootloader
-Unplugged D/C power source, then transfered to PC.

RSD located my phone and started the re-flashing process..

Moral of the story.. DONT USE ROM MANAGER ON A CLIQ !!

[Double0EK]

Well let it boot into that screen then transfer it to your computer.
If that doesn't work then can you access the recovery screen?
Edit: I guess we were typing at the same time..
But you can only use ROM Manager's Recovery, ClockWork. It works you just can't use any of the on screen options. Only in the recovery.
Sent from MB200, on CRACK, Using Tapatalk!

[H3XAPL3X]

yes well i can access the recovery screen, and i managed to flash the default recovery back onto the phone, now im trying to flash stock 2.1 sbf file using rsd

[H3XAPL3X]

so I actually posted a post before, but im just continuing, anyways... so i've realized that i've badly bricked my cliq... and after trying EVERYTHING, the only solution was to reflash the firmware using RSD lite.. so i tried.. everything goes great until it needs to reboot... see the thing is my cliq will ONLY boot if it is hooked up to a wall charger, if hooked up to the computer, it sits there with the flashing white LED.. absolutely useless. So i got the smart idea of booting it into bootloader (USB INT blue screen) then un-hooking it from the wall charger into my pc (which actually worked !) so anyways, RSD recognized my phone in bootloader mode, and i started the flashing process (back to the stock rom).. after the process it needs to reboot but because it's hooked up to the pc, once it shuts off, it does the pulsing white light.. and then i get nowhere. Can someone please help me out ?? thanks so much modmymobile <3

[sublime1184]

You can continue in the same thread. Threads merged.

[H3XAPL3X]

thanks but do you have a solution ?

[Double0EK]

So the phone does not boot at all? Can you get to the Home Screen? Have you tried the 1.4.8 firmware? I would try that and see if the phone likes that better...

Sent from MB200, on CRACK, Using Tapatalk!