[1-Click] RecoveryFlasher for Motorola BackFlip (& Cliq/CliqXT)

[marquisg]

Really... mmm I think you are the first one who has success there.

I remenber I tried in my two cliq xts and no result. Somebody said that could even semi-brick it!!

But, I dont know, no luck for me with super one click!!!

i don't know, when i did it, i checked psneuter, not rageagainstthecage, because when i used rageagainstthecage, it didn't work and just kept looping, but when i used psneuter, it worked fine.

[tehkrohnz]

Wow, I think I managed to **** up something as simple as this. Pretty sure i just bricked it but not positive. I was in the process of rebooting into recovery, I was waiting on a black screen for a while and had to get off my train. When hopping off I dropped my phone and the back panel and battery came out. ****. Worst timing ever. I've rebooted it straight away hoping MAYBE, MAYBE I'll be lucky. Nope, it just not sits on the motorola blur boot screen and doesnt go any further.
Has my clumsiness and stupidity bricked my phone? Or is there any was around this?
I tried seeing if my pc will recognise it, incase i can put on a recovery that way and boot with the camera button recovery boot, but it doesnt appear when I punch in adb devices.
Any help would be VERY greatly appreciated.
Oh this is a Moto Dext too.
Thanks,
Tehkrohnz

[wdeydwondrer]

um, being that this is the backflip forum, i'm not sure how much response you're going to get on how to save it. if it's like the backflip you might possibly be able to use rsd lite to reinstall the original image if you're able to find it for your phone....

[tehkrohnz]

Oh i didnt notice i had moved over here! My bad! Sorry

[K10S]

goddammit...i pressed the reboot button without having installed the recovery and now i cant get out of the original recovery screen! Help!!

[bconover93]

Use RSD Lite. Pull the battery. Turn it on while holding J + D. Flash the correct sbf file. set up. reroot, flash, rom, etc.

[K10S]

Hey thx for the reply....ill elaborate my problem a little more:

i have a mb300 and i tried upgrading it to gingerbread form 1.5. I successfully rooted it, but when trying to flash the j_r0dd-mb300-v2.0 recovery it just gave an error something like "not writing bad block error writing recovery No space left on device". I couldnt find a fix for that or even a real explanation to the problem. While i was searching though a found this easy app called 1 click recovery flasher in a forum. I tried flashing with that but it didnt work either. The app had 2 options: one was flashing and the other rebooting. I accidentally touched reboot and it went to the blue "security on fastboot disabled" screen. And now i cant get out of it, not by taking out the battery and waiting and also flashing with rsdllite gives me an error.
Help!

This is error log i get on rdslite:

02:52:39, January 15, 2012
Line: 340
ERROR: Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0x17BF800 Command: BIN
File: D:\test_dev_usb\flash\code\flashdll\FlashOp.cpp
Device ID: 0

02:52:39, January 15, 2012
Line: 1177
ERROR: Phone[0000]: Flash failed.
File: D:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp
Device ID: 0

02:52:39, January 15, 2012
Line: 587
ERROR: Flash failure: Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0x17BF800 Command: BIN (Error Code: e0020014),
Detailed Error Details: Direction of the Error=3000, Command Value=300000, Code Group Number=2
File: D:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0

[bconover93]

no clue what that means, but the recovery included in ROM Manager (it's in the Market) works just fine for flashing CM7...hope you figure it out. someone else will probably have the answer.

[adlx]

Hey thx for the reply....ill elaborate my problem a little more:

i have a mb300 and i tried upgrading it to gingerbread form 1.5. I successfully rooted it, but when trying to flash the j_r0dd-mb300-v2.0 recovery it just gave an error something like "not writing bad block error writing recovery No space left on device". I couldnt find a fix for that or even a real explanation to the problem. While i was searching though a found this easy app called 1 click recovery flasher in a forum. I tried flashing with that but it didnt work either. The app had 2 options: one was flashing and the other rebooting. I accidentally touched reboot and it went to the blue "security on fastboot disabled" screen. And now i cant get out of it, not by taking out the battery and waiting and also flashing with rsdllite gives me an error.
Help!

This is error log i get on rdslite:

02:52:39, January 15, 2012
Line: 340
ERROR: Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0x17BF800 Command: BIN
File: D:\test_dev_usb\flash\code\flashdll\FlashOp.cpp
Device ID: 0

02:52:39, January 15, 2012
Line: 1177
ERROR: Phone[0000]: Flash failed.
File: D:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp
Device ID: 0

02:52:39, January 15, 2012
Line: 587
ERROR: Flash failure: Phone[0000]: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0x17BF800 Command: BIN (Error Code: e0020014),
Detailed Error Details: Direction of the Error=3000, Command Value=300000, Code Group Number=2
File: D:\test_dev_usb\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0

It seems you have a bad blocks problem on your flash memory (quite a frequent problem on CliqXT, I don't know if it's also that frequent on Backflips). This issu eprevents you from flashing a recovery (which sucks).

Even flashing the sbf fails because it tried to flash the recovery.

What you will need is to edit the sbf (MotoAndroidDepacker1.3) you are trying to flash and remove the recovery from it (removing the right CG file from it), then repack and flash (and pray for it to work).

[K10S]

how do i know which recovery file is the right one? i found recoverysec.mbn and recoveryhd.mbn

[schrickz]

if I use cwm recovery , should I download n flash j_r0dd too ?
my phone bricked once , I've download n flash all 3 recovery (still new so please don't laugh) , maybe this what causing my bf to brick ..
when I boot into recovery it hangs when press the volume down button , so I have to reflash 2.1 firmware , rooting n installing new recovery n flash cm7.1 again ..

[Saurus]

There is only one recovery in a phone - it's the menu you get from booting with Pwr+Cam (etc.) keys; stock recovery allows only flashing a file named 'update.zip'. A custom recovery allows flashing a .zip file of any name (custom rom), and also provides backup (nandroid) capability. Choice of which custom recovery to use is of no concern for most people - they all do those two essential things. CWM is a good choice for just about anyone, but I like j_r0dd's too.

[schrickz]

hmm ..
thanks for the info ..
thats clear up one question ..

[bconover93]

CWM Touch is out for Cliq! That means Backflip will probably be soon.

[backflip001]

Please my phone full bricked after flashed signed-76XXC-63805040-SDCBALUM.zip with j_rodd recovery.now my phone can't power on and my pc can't detect the phone but if i touch menu,home or back it still vibrate. Please help me. Thank you