Bricked the German retail Backflip

[narrow]

I have a Germany retail Backflip. Some time ago I rooted it and flashed the j_r0dd Preclair and the signed-IT radio by j_r0dd Recovery. Because of permanent bootloop I decided come back to the stock ROM. So, I downloaded the RSDLite, Moto USB drivers and flashed the motus-Retail-IT-0.3.6-supermonster-customer-secure.sbf. ( I tried also two German retails ROMs and first Italian and was the same situation). So, today I have bricked phone: I can get Bootloader USB mode with Power+J+D, sometimes I can get recovery mode using Power+Camera (I have to remove the battery from the phone to tens of minutes) but if I turn on (reboot), Backflip freezes with a white Moto logo display and nothing next.
Have you any idea what happened and how I can resurrect my phone ?

Thanks
Greg

Ps Sorry for my English

So, today I completely bricked my phone this mean I have used Depacker and rebuild the .sbf file composed of the Germany retail ROM and signed-76XXC-63805040-SDCBALUM radio and I have flashed it. Then I have the black screen Backflip with vibrate Home, Back and Menu keys. My Moto is dead.
Have a nice weekend
Greg

Ps. Can I get my phone to a service or I can throw it into the trash ?

[Pzyduck]

No one is going to help?

[narrow]

I found the AT&T Backflip for the parts with a good PCB board. Can I use this one as a donor ?
Thanks for answer
Greg

[Double0EK]

If you can get it into Bootloader USB Init mode then you should be able to save it.
You might loose 3G data but you can try the AT&A 2.1.5 sbf.

Sent from my CM7'd Cliq using Tapatalk

[Saurus]

I found the AT&T Backflip for the parts with a good PCB board. Can I use this one as a donor ?
Thanks for answer
Greg

Very likely you can swap the main pcb. I have never seen a BF close up, but phones of the same model usually have common hardware, only firmware differences & branding. If the connectors mate, you should end up with a working AT&T phone. Be nice and swap the labels, too.

[backflip001]

Please my phone full bricked after flashed signed-76XXC-63805040-SDCBALUM.zip with j_rodd recovery.now my phone can't power on and my pc can't detect the phone but if i touch menu,home or back it still vibrate. Please help me. Thank you

[lnvaliveti]

Please my phone full bricked after flashed signed-76XXC-63805040-SDCBALUM.zip with j_rodd recovery.now my phone can't power on and my pc can't detect the phone but if i touch menu,home or back it still vibrate. Please help me. Thank you

Remove battery, Pause, Put it back. Start the phone while pressing "J" and "D" keys simultaneously. Little tricky but can be done if you use both hands. See if Blue Screen with M logo and USB Init comes up. Then there is hope.

You need to download RSD Lite and then any suitable *.sbf file for your device, try Firmware Super thread to find out

[backflip001]

yes I need help please.My motorola backflip ( MB300 ) is Bricke and does not light up .when I turn it seems to me that it is on because when I touch the touch keys at the bottom of the screen of the phone , I feel as if the vibration was call you on but nothing appears on the screen whilethe screen has no problems.I am told that it is a hard brick , and in this case I can not get my phone.Thank you for your response

[Saurus]

yes I need help please.My motorola backflip ( MB300 ) is Bricke and does not light up .when I turn it seems to me that it is on because when I touch the touch keys at the bottom of the screen of the phone , I feel as if the vibration was call you on but nothing appears on the screen whilethe screen has no problems.I am told that it is a hard brick , and in this case I can not get my phone.Thank you for your response

Bricked the German retail Backflip

Do not post the same thing in multiple threads. It gets no more attention. Tell what you have tried, if anything. Your only hope is to flash an official firmware using RSD Lite, but even that may not help.