'defy CM 7.2 2012-0325 by Quarx2k' for cliq 2

[Michaelbaker]

Thanks very much for Quarx2k.
Features:
1.stable
2.excellent camera performance
3.fixed wifi
4.T9 predictive Phone dialer
5.Updated translations
6.you can choose how many Multi-touch points in settings->Device settings ->Multi-touch points(don't use the Baseband selection)
7.use cliq 2 's Gingerbread's baseband
8.excellent gps performance in my country ,but the gps performance may be bad in your area,just find a proper gps.conf
and replace the original one (mind it's permissions)

Attention:

Flash it from cm7 or miui .
Remember to wipe.

You have to fix the keyboard munually (Settings->CyanogenMod settings->Display->Automantic backlight choose the Use custom then choose Edit other levels,change the first value of the keyboard line to 1 or numbers range from 1~255,the keyboard light would be light up).

You can change the Battery status stytle by choosing settings->CyanogenMod settings-> Interface ->Status bar tweaks->Battery status stytle

You can add more Widget buttons by choosing settings->CyanogenMod settings-> Interface ->Notification power widget -> Widget buttons

You will feel better if you use Go launcher EX.

unzip my attachement sholes-keypad.rar to get sholes-keypad.kl and sholes-keypad.kcm.bin. Put the sholes-keypad.kl into /system/usr/keylayout and change its permissions to 644(rw-r-r).Put the sholes-keypad.kcm.bin into /system/usr/keychars and change its permissions to 644(rw-r-r).Reboot your phone.
Oh I can't upload files,download them here:http://dl.dropbox.com/u/65349612/sholes-keypad.rar
rom download link:
http://dl.dropbox.com/u/65349612/M_c...-Defy(exp).zip
360手机助手截图01.png360手机助手截图01.png360手机助手截图03.png360手机助手截图04.png360手机助手截图05.png
See more picture ,just download this :http://dl.dropbox.com/u/65349612/M3.rar

unzip the MokeeDestop.rar (http://dl.dropbox.com/u/65349612/MokeeDestop.rar)and you can get MokeeDestop.bat ADWLauncherEX.apk adb.exe AdbWinApi.dll AdbWinUsbApi.dll,put them all in (in your computer)C:\.Check usb debug model and connect your phone with the computer via usb and choose charge only.Click the Mokeeos.bat and the script will run and the original AdwLauncher.apk will be deleted and an excellent AdwLauncherEX.apk will be pushed into /system/app and be set permissions to 644,then your phone will restart right away.

unzip the Pop_up_Message.rar (http://dl.dropbox.com/u/65349612/Pop_up_Message.rar)and you can get PopUpMessage.bat MmsExtra.apk libxiaozhu-1016.so adb.exe AdbWinApi.dll and AdbWinUsbApi.dll,put them all in (in your computer)C:\ .Choose the usb debug model and connect your phone with the computer via usb and choose charge only.Click the PopUpMessage.bat and the script will run.Reboot your phone munually and your phone will have Popup Message function.
If you have updated your phone to the latest official gingerbread , do not flash 2.2.2 sbf or your phone will be bricked!

[cliqyguy]

nice.. got any pics or a video before i flash//....

[alarmdude9]

Once again you are awesome for hooking us up! Other than the goofiness with the keyboard and possibly the gps does everything else work out of the box?

sent from my rooted cliq2 running miui

[Michaelbaker]

Once again you are awesome for hooking us up! Other than the goofiness with the keyboard and possibly the gps does everything else work out of the box?

sent from my rooted cliq2 running miui

I've been using this rom for five days.Everything works well.But I have to say that I don'y have a 3G sim card ,so I don't know about its 3G performance.

[esatapedico]

I've been following this forum for quite some time, and I just couldn't stand such an awesome rom standing here for so long without saying thanks. I've flashed it yesterday, and it's working flawlessly for me, including 3G and GPS. I just can't tether it through wi-fi natively, and with other apps I can't tether in infrastructure mode (only ad-hoc). But, well, that's exactly how it worked in the version I came from also.

My boot is about 15 to 20 seconds faster (measured with Android Assistant 3.8) even after I restored through Titanium Backup everything I had installed and configured before, with data. I might be forgetting something, but that's exactly how I did and I found it pretty impressive.

Great job!

[alarmdude9]

Another stupid question. Is this a "newer" version of cm than the other ones posted?

sent from my rooted cliq2 running miui

[Michaelbaker]

I've been following this forum for quite some time, and I just couldn't stand such an awesome rom standing here for so long without saying thanks. I've flashed it yesterday, and it's working flawlessly for me, including 3G and GPS. I just can't tether it through wi-fi natively, and with other apps I can't tether in infrastructure mode (only ad-hoc). But, well, that's exactly how it worked in the version I came from also.

My boot is about 15 to 20 seconds faster (measured with Android Assistant 3.8) even after I restored through Titanium Backup everything I had installed and configured before, with data. I might be forgetting something, but that's exactly how I did and I found it pretty impressive.

Great job!

Thank you!I'll post a better Desktop (apk),and a popup message(patch) later.

Another stupid question. Is this a "newer" version of cm than the other ones posted?

sent from my rooted cliq2 running miui

It's the newest cm7 bulit by Quarx2k so far.I'll follow Quarx2k,and try to port the cm 7 that he bulids for defy.

[Saurus]

Thank you!I'll post a better Desktop (apk),and a popup message(patch) later.

It's the newest cm7 bulit by Quarx2k so far.I'll follow Quarx2k,and try to port the cm 7 that he bulids for defy.

Thanks for your continued good work, Mb. Hopefully I will have a C2 to play with soon - my phone came back from warranty repair "liquid damage". Sure enough - under the display, so I have to fix it myself. The good news - my wife doesn't want it now.

[QuickSilverAWD]

Can someone give me a step by step walkthrough for going to this from an unlocked stock 2.2.2?

[Michaelbaker]

Thanks for your continued good work, Mb. Hopefully I will have a C2 to play with soon - my phone came back from warranty repair "liquid damage". Sure enough - under the display, so I have to fix it myself. The good news - my wife doesn't want it now.

[QuickSilverAWD]

Bump?

[sinusq]

first you need this [Mod] Big Update! 2ndInit!
then install cm7 rom (you can find explanation how to do this, in post with CM7 rom), after that you'll able to install this rom (and after installation of cm7, you gonna know how to do make it )

[sinusq]

Bug!
Cant swith off Led light when charging.
Even when editing build.prob

[Michaelbaker]

Bug!
Cant swith off Led light when charging.
Even when editing build.prob

Thank you .You can try to edit the build.prob and add a line :ro.battery_light=false
And find the line persist.sys.charge_led= change it to persist.sys.charge_led=off,reboot your phone .If the problem can't be settled,I will try to find another way to fix it.

first you need this [Mod] Big Update! 2ndInit!
then install cm7 rom (you can find explanation how to do this, in post with CM7 rom), after that you'll able to install this rom (and after installation of cm7, you gonna know how to do make it )

then install cm7 rom(by wanggighost) (you can find explanation how to do this, in post with CM7 rom), after that you'll able to install this rom (and after installation of cm7, you gonna know how to do make it

[sinusq]

You can try to edit the build.prob and add a line :ro.battery_light=false
And find the line persist.sys.charge_led= change it to persist.sys.charge_led=off,reboot your phone

still lighting :/
whats more - when I reboot my phone I have to turn on the Skype in system settings every reboot.