[Another victim] I killed my E1 .. Please help

[wrp8]

After flashing this MP (MP Mixed By jzzz - java games removed) LINK , my phone was dead forever
Please help
I flashed MP with my E1, which has already been BL downgraded to 07.D0. I have been using E398 everyday il trying this MP

Current status:
Blank screen (dark)
Still 'connect' on FBU3/MFF/RSD

Tried to fix:
1. Flashed any 398MP with FBU3
->frozen/quiet
2. Flash BL07.D0 with MFF
->Phone seemed to be BLANK, finally failed
3. Flashed any 398MP with MFF

Note:
Still 'connect'
It's E1 but already BL down to 07.D0
After flashing that MP, I continued flashing LP0021 by entering BL mode, even it appeared blank screen
Then quiet came up with coma sign

Once doing anything with FBU3, it just froze like this..

[shindou01]

you need to repair PDS to revive your phone...if you have a PDS back up, use it...otherwise, use the tutorial on the guides section to rebuild your PDS...since you have a downgraded E1 using bootloader 07.D0, the steps to rebuild it is the same as the one to be used with the E398...i've done it so many times and it worked like a charm each and every time...so i suggest you go to the guides section, read and understand the guides,and then do it step by step...

it worked for me and i'm sure it'll work for you too...look at the sticky thread too...there's a guide to reviving the phone in the mini bible of E398...

[wrp8]

Many Thanks shindou01
Will post the results soon

OK my phone is back now
I did the followings

Force BL with 2-pin needles
BL appeared again (that's my hope)
Flashed with E398 MP

That's it

Huh... E1/398 never die but I was nearly dead

[shindou01]

great..nice job...

you might want to search for all the other stuff you see in the guides section just in case though...(just in case)...it's a good thing you didn't have to rebuild PDS...anyway...don't forget to make back ups as before doing anything to the phone...as stated, the E398 can never really die...except for hardware failures which only happen 1 in 300 phones...

great..nice job...

you might want to search for all the other stuff you see in the guides section just in case though...(just in case)...it's a good thing you didn't have to rebuild PDS...anyway...don't forget to make back ups as before doing anything to the phone...as stated, the E398 can never really die...except for hardware failures which only happen 1 in 300 phones...

[tegezan]

ha..ha.. just need forceboot right?

[wrp8]

yes mate
Actually this was not my first time to do FB
First time I bought a dead 398 from ebay for less than 5 GPB. I then tried to FB (2 needles) for less than 5 minute and it was reborn.
This time I was a abit unsure since it is E1@07.D0. I was not sure if it was still 07.D0 when I broke it or it returned to 0A.20.

Hence as long as the PC can see the phone adn RSD/MFF can say 'CONNECTED', our 398/E1 will never die!

[chinito20]

When the e398 and E1 is dead is important
forzed the fhone for out the bootloader is very easy
and work perfectly..

You only must be have patience...xD..

[reverendbert]

dead E398/ROKR? It laughs in the face of death. . Forcing the bootloader proved very useful when I still had mine (my ROKR didn't take too kindly to water ).

[chinito20]

When you fall in water is important to remove and dry immediately
you must use the method bimbo bread
find a wire with two ends coming into the slots on your phone and then place the tips of right to left count 1,2,3 4y5 need to use

View the video forced the bootloader

must have patience xD xD...

[linuavilax]

Good day! ... I am another victim.

My case: I have uploaded several times to my MP ... e389 07.D0 Bootloader is .. or rather, had. then load a backup of the BL 0A.02. and because as you know ... This position (with the F & B) and then no longer stuck, then we have my cell no longer has BootLoader ... I can do? ... and how not Boot ... but if it recognizes the PC ... (That is what I am relying only on the PC continues to recognize it by the way .. I am again in this ...) saludos bye

hey!

Clever! ... fix it! ... if someone is ...

CAUTION: Never charge a Bootloader than your cell phone ...


This tutorial is designed to have problems with E398 q PDS and this "dead" but still recognize the pc as "S Blank Neptune"

You need:

1. aze2learn_ramldr_special_repair_kit
2. 42R_for_all (full flash)
3. RSDLite or MultiFlashFlex
4. Thin wire (size 22)

Well, first thing is to connect the phone and wait aq is detected by the pc, once detected the RamLdr open and looking at the bottom left corner that says "Connected"

1. Click on "Send RamLdr" and choose "ldr_all.bin" which comes in the same folder as the RamLdr.
2. Then we click the "Erase" and hope for q in the log window leaves us "ACK ERASE" (Be patient, not leave anything in a while)
3. Once the "ACK ERASE" We changed the words for Base Addr 10000000, and we click on "Send Binary". Select the "20000only.bin" and wait a few minutes after it should appear in the bootloader screen phone
4. Now open or MFF RSDLite you get the fullflash of 42R_for_all

And voilà! We have repaired the PDS from our E398 without the SmartClip, we can now flashiar any MonsterPack recommend the MotoMusiQ v2

VARIATION:

RamLdr If our phone does not recognize or do not get ACK ERASE in log, we should force the phone to enter the Bootloader, this we do by joining the pins 4-5 of the data port phone with the cable and the battery ( video here)

If the phone manages to enter the bootloader flash 42R_for_all (Step 4)
If your phone does not enter bootloader but it recognizes the RamLdr we can try again from step 1
If none of that works, we must make TestPoint

Espero q les sirva, and remember to always do before a Fullbackup anything if the phone dies

Credits:
Original version in English by tata78: http://www.motomodders.net/Default.a...&postid=340057 http://www.laneros.com/printthread.p...page=493&pp=20

[reverendbert]

I tried that. I can get into the bootloader but the damn thing wouldn't charge (let alone hold a charge well) even after I cleaned the contacts (and I've tried building a standalone battery charger but it wasn't very...erm...safe). Might consider getting another one when I come into cash that isn't being spent on necessities. The SE K800i is far too boring to mod and the X1 is very temperamental; E1 was pwnsome.

[™Rated®.]

i have an e398...an it only like err:0*500,
it would be nice if some1 gave me info..on what to do...?

Good day, hope that u could help me out.
I have a E398/E1Rokr bin flashin it cause some modpacks keep freze the fone an retuns to boot loader, finaly the fone read Err:0*500.. from that instant it wont take any flashin...help me out