- 08-24-2009, 06:45 AM #1
Itty Bitty Modder
- Join Date
- Nov 2006
- Posts
- 8
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 397
- Uploads
- 0
L9 restarting after showing Bootscreen, plz help
my L9 restarting after showing Bootscreen
and its not detecting in bootloader mode. when i connect to PC the top blue light is glowing for 5min and starting the fone, but restarts after showing bootscreen. its going to Bootloader mode when i press *# and put battery back. but showing USB device not recognized when i connect to PC. i have all the p2k drivers installed and i have the F&B with profile for L9...please help ...thanks in advance
- 08-24-2009, 06:58 AM #2
REinstall the drivers, And if u are getting entry into bootloader, then try using RSD lite.

MOTO GETS BEST AFTER REMOVAL OF RSA.Only startup matters but everything goes fine...
Thank You TRAMNET - Helped me in creating my sig.
- 08-24-2009, 09:04 AM #3
Itty Bitty Modder
- Join Date
- Apr 2007
- Posts
- 10
- Thanks
- 5
- Thanked 0 Times in 0 Posts
- Downloads
- 116
- Uploads
- 0
reinstall the drivers.press * # and power entry into BL.using Flash backup 3.06 too.
good lucky !
- 08-27-2009, 05:45 AM #4
Itty Bitty Modder
- Join Date
- Nov 2006
- Posts
- 8
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 397
- Uploads
- 0
thank u guys, i tried all the possible ways, still not working for me
.Seems the problem with the USB interface hardware. m gonna giv it to service center.
- 08-27-2009, 07:37 AM #5
try changing the data cable. or maybe try doin the same at your friends place. then give it to the servce center.
- 08-27-2009, 01:06 PM #6
Skilfull Modder
- Join Date
- Mar 2008
- Posts
- 602
- Thanks
- 2
- Thanked 71 Times in 46 Posts
- Downloads
- 198
- Uploads
- 0
are u sure that u have a 2.0 USB port????
- 08-27-2009, 01:54 PM #7
usb 1.1 doenst work? i ddn knw that!
- 08-27-2009, 10:21 PM #8
It can work on 1.1 as well.
@prasanthkvm
Try using different ports.not much active on M3 now
- 08-28-2009, 01:39 AM #9
I had the same problem after installing damaged DRM. You should press *+#+red button and then Insert battery. And flash your backup.
- 08-28-2009, 06:39 AM #10
Itty Bitty Modder
- Join Date
- Nov 2006
- Posts
- 8
- Thanks
- 0
- Thanked 0 Times in 0 Posts
- Downloads
- 397
- Uploads
- 0
cable is working fine with my L7 and A810, and yes ive USB 2.0 ports also and even i tried different ports. some hardware is srewed up inside it seems, nyways thanks guys


LinkBack URL
About LinkBacks
Reply With Quote
