help me out plz..bricked my BOOT loader

[kashyap_92]

well ive seen that the L9 can be swithced on wven by removing RSA...n tried out the bot which was given ..and thus resulted in bricking my mobile... now i cant even turn it into boot loader mode...kindly help me out with this please... this was the thread by which i was impressed and modded it...

i changed my boot c 70 to c40 which was given in this thread...

==> http://www.modmymoto.com/forums/showthread.php?t=530413

plz help me out...!

tonz of thanks to people who would coume forward to try...

plz..help me...!

the following is the complete discription of wat happened...

well i had a RSA PROTECTED Mp..quickslvr(vrsn 2.0) with the STEEL DRM

then i opened RAMLDR2 and read the memory after sending the loader

then i clicked WRITE BOOT and selected the C-40 boot which was supplied in that thread...with name "NEW"

and after that it is not at all responding to any of my attempts

even flash and backup is not working..

please help me out guys...

and please help me out...im pleading u all ...my L9 is like my second soulmate..help me out...

[thetuxracer]

im sorry, your phone is useless now. u shoud have read the complete thread before doing anything.

[rocky5454]

yes you must have read the complete thread if you have then you might not think of doing so because it is clearly written that many people lost their phone by doing so. now nothing can be done with that phone till some finds a way till them wait or it might the end of ur phone.

[MrPeriyar]

@rocky!Your english is rocking!!!

[kashyap_92]

cant ne thing be done now..? plz guyz... help me out wid dis s@#it...!

[thetuxracer]

nothing can be done. just keep it around, in case theres some workaround!

[kashyap_92]

well buddy... could u please let me know all the ways to flash an MP.. and even to know wether we could reload d BOOT LOADER in sum other manner..

and could u plz let me know which CG contains BOOT in it...!

hope u got my questions...

plz try to answer to dis questions...

[thetuxracer]

the only way to flash an MP is using fb3/rsdlite. there is testpoint for L9, but not sure if it will work. google testpoint for L9.

no CG contains boot, its a diff thing known as the boot itself. you can try tho, there a stock 0c.70 BL in the downloads section. maybe that would work.

[abhishek.msd.msd]

@kashyap I'm sure if u return the phone to some big phoneshop they'll be able to help u by sending it to the factory... That's the only hope...

[thetuxracer]

^ nope, doesnt happen that way. ul hve to get a 2nd/used/soft-bricked/dmaged phone, and use its MB. u can only stay in touch, and hope that some-one comes up wid a sloution to ur prob..

[kashyap_92]

thnx 4 ur concern guys.... well and ya... @thetuxracer-"could u plz give me the procedure to send the boot to d phone(all the ways possible..thr must be some guides for it..) and even the link of the download to 0c.70 plz..."

n plz dont feell dat to be a burden... if at all u feel dat to be a burden...itz okey ... i can understand... any one intrested could do dis for me...id b thankful to dem... n ofcorse for u THETUXRACER and abhishake 4 ur concern...................

[thetuxracer]

1. download ramldr, from the DL section.
2. download the 0C.70 BL from the DL section.

the steps maybe incorrect, but this is the general idea.
open ramldr, click connect. click write boot, select the downloaded boot profile. after that,maybe your phone will revive. then try flashing a MP.

if nothing works, try this: but again, it is at your own peril, at your own risk. it might be that your phone is recoverable now, and it might not be after flashing this: RFDI. we are not responsible for anything that goes wrong. understood bro?

[bj@008]

@Kashyap can u tell me which boot ver ur getting in RM after writting new boot is it 0400 or Oc7O or oc4o and do phone disconnect itself after sometime and is it detected as s blank mode in FB3 or P2K tools

[kashyap_92]

@ "BJ@008"==>

yes....itz getting disconnected after few mins in P2k and F&B....

besides.. at present i dont have ma mobile..itz wid psome technician.. so cant tell u rite now abt the boot...!

so can u estimate the problem dat im facing wid D DISCONNECTING issue..??? :O

hope u understand my languag...!@___@

[thetuxracer]

well i had the same disconnecting problem. i was facing a memory map problem. i had to write the CGs in ascending order, i.e wrote the ones which are smallest first, then incresasing in size.