need help flashing v8 with bootloader a3.cf

[dee4dee]

i ave try flashing this fone with diffent flash but no luck. Is there any compatalbe flash file for this bootloader a3.cf. fone sart up with logo and cut off. thanks for any help!

[Xtian89]

Flash NoRsa boot a3.cf, and then this MP, which is the most recent:
[MP] Linuxmod Fusion 3 Speed

Use RSD lite 4.5 or newer (google it)

[dee4dee]

thanks for that bro. but didnt work, the 512mb flash work for 2mins then ack to cutting off, the 2g flash, fone freeze on start up! any other good advice?

[Xtian89]

NoRsa boot was flashed succesfully??

Hey, you only must flash the correct MP. Is your phone a 512mb or 2Gb V8??

After flashing the MP, does RSD lite show PASS??

[dee4dee]

I am not sure, i think its a 512mb, when flash with fusion3 512mb the fone come to insert sim but cut off after 1min, then back to cutting off at start up logo. When flash with 2g fone freeze at start up logo. For both fashing RSDLite do not say PASS! It freeze saying "please manaully power on phone"! (RSDLite 4.9). Thanks!

[Xtian89]

It´s easy to know that! Connect your phone as memory card mode and so you will know if your phone has 512Mb or 2Gb of storage memory.

Well, when RSD lite shows you "Please manually power on your phone" you have to disconnect the data cable (don´t close RSD lite), turn off your phone (remove the battery and reinsert it) and power on in bootloader mode and reconnect to the pc. Wait until the program shows you pass.

[dee4dee]

Thanks for helping me with this fone, i apprechate it! but still having problem!
The fone is not booting up for me to put it in memory mode! Did what u said about rsd lite to say PASS! but same old, same old!

[Xtian89]

Ok, mate. Let´s wait for their answers: [MENTION=48184]Triforce[/MENTION]; [MENTION=2672721]Pzyduck[/MENTION]; [MENTION=1122281]Hairo[/MENTION]

Can someone help him?
thanks

[dee4dee]

Thanks bro, i need the help!

[Hairo]

Can you be more specific... What did you flashed first?? did you flashed the norsa boot??

[dee4dee]

I flash the fone with files in step 1 folder then file in step 2 folder.

[Pzyduck]

There have been some needed changes, like the "Disk partitioning" menu is gone as it is pointless for the 512MB V8, also other referrences regarding "non-existing" bits of the 512MB (e.g /mmc/mmcb1 etc)
Z6Manager still does not work fully smooth all the time. All scripts are in english now, even SysInfo. I have added an automatic activated 48 MB swap file.
Works quite OK so far.
Any bugs, please let me know.

VERY VERY IMPORTANT!!!

Please do NOT disconnect the V8 after it has rebooted. It will reboot again!
Just leave it connected and RSD running. About 1 minute after RSD says PASS the V8 will reboot a second time. Only when RSD says "connected" you can close RSD and disconnect the V8.
If you do NOT stick to this your V8 might become unresponsive and work in a very funny way!

It's this information useful?

[dee4dee]

In some sense! After 100% rebooting mobile, RSD lite shows you "Please manually power up your phone" for more than 1min. Going to try flashing the again to see if it would reboot a second time. Need the BEST step-by-step to fix this fone !

Fone is working ok now! I reheat the circuitboard! Thanks xtian89 for ur asistances!

[Xtian89]

Ok, it's great that it worked!

[ashish.ramani]

zzz