[Sistema-Z6] [MP] - Recupera tu Z6 con Linuxmod 2.1 Flex recuperación Edition!
Well, I've had several drawbacks when installing new firmware, and I also had a lot of people, such as the system to the boot screen or is extremely slow. Usually resetting the device mtos fix the problems, but in some cases it is not possible, since the system becomes unbearably slow.
Returning to rotida and slaughtering my Z6, I made a new firmware:
Linuxmod flex 2.1 recovery Edition (LMF21RE)
What does this firmware?
its retrieves the phone, resetting it and reinstalling crucial system files.
Some folders such as / ezxlocal and / tmp are read-and-writing, and if you delete a file which should not, the cell "dies" and even reinstalling firmware fixes this. LM that was developed for these cases.
How to install:
1 - Install the bootloader A3.CC Norse, if you do not have it installed.
2 - Install the Flex 2.0 or Linuxmod Blacl Dawn.
3 - Install the Linuxmod flex 2.1 recovery Edition
Directions for use: After you install the firmware LMF21RE, turn it on. The phone will start and will stop at the boot screen. After completing the restoration, the system will shut down. During these processes, ALL USER DATA WILL BE LOST! This firmware is only to recover Z6 cellular "dead." Do not use if your firmware is operating normally, or you lose all your data.
NOTE: After the process, the phone will automatically disconnect. This restoration process can take about 5 min or more, or less, depending on severity, but this time, DO NOT HAND OFF!.
NOTE: This firmware HAS NO GUI, the system will turn on and stay on the boot screen. You can not perform any functions until the system ends and hang up.
After completed processes and the cell turns off automatically,>>> reinstall any firmware you want <<<, since it only restores the system firmware, and has no interface.
Main uses:
-Dead cell-recover (caused by the firmware)
-Restore-default passwords
-Recover system if it is showing instability
-Simple method of erasing data.