drivers for sprint v3m on dark edition.

[98xploder]

anyone have any that will work? i have tried 2.6 II 3.0 3.1, 2.9 etc. so my question. anyone running dark edition and have drivers that work? it owuld be helpful.

BUMP! someone knows the answer.

[Village Idiot]

They should be the same as all the other drivers for the V3m's.
Did you try the ones from motodev.com?

[98xploder]

link me. maybe im tryin the wrong ones.

[Village Idiot]

www.motodev.com

You need to register to download the drivers

[98xploder]

lol
i am registered. give me a direct link to where they are on motodev. its not like you can dl them without logging in

[Village Idiot]

https://developer.motorola.com/docstools/USB_Drivers/

[V3m_Tester]

Hi, I have 2 sprint v3m's and two pc's one pc has USB 1.1 and the other pc has 2.0. One phone has the latest firmware update and the other has been flashed many times from Vivo, Altell and back to Sprint... is is now one revision behind the latest firmware. So you know that I know what I am doing as for hard ware and connectivity, I will give you my pointers on connecting the blasted Sprint phones!!!

USB 2.0 works flawlessly with Sprint V3m phones using all Sprint firmwares... just remember to install Motorola USB drivers from the Developer site and install MPT first. Reboot wait a minute, start MPT and wait till it wants you to connect the pone. Once you get it to connect to the phone. The system will charge your phone normally.

If you see any issues with drivers not loading in the device manager you will need to remove them and reinstall the drivers using Motorola Driver Installer and have it clean and install.

Ok, if all that did not work remove battery from phone and wait at least 10 minutes without being connected to the USB cable. After that install and run MSU and wait for it to ask you to connect the phone. Do not reintall the battery... just connect it to the USB cable and PC. It may reinstall drivers that may need to install that did not. After a minute it should see your phone... check if the phone can power on... you may need to be careful when holding down the power button, you can pull out the USB cable if not careful.

As for USB 1.1... it is a bugger!!! You have to go to the device manager and have the motorola composite device updated with MPT drivers... some times it will try to pickup Moto USB drivers and use them. Then you will need to install the drivers for the rest of the Motorola devices from the Common Files\Motorola Shared\MotPCSDrivers\ and or Common Files\Motorola Shared\MotPCSDrivers\Drivers. Also you may need to make sure that you select the WDM driver for the com port before getting the modem install. Both USB 1.1 and 2.0 use the same com driver.

Just a note the original firmware version was a bit easier to install... 3P and 4P suck since they require the latest drivers... something to do with hardware ID's moved from 62 to 64 and will not function with most posted drivers.

Enjoy!