From Guides

by InsecureSpike

The BEST way to flash the Linux Motorola's is to use RSD Lite 3.9, or higher

This is the way i Flash my Linux Motorola's, i would not recommend using Flash&Back up 3

(try to avoid RSD Lite 4.1)

Please DO NOT request ANY RSD Lite To find the NEWEST RSD Lite search Google or 4Shared

Next, install the NEWEST Motorola Drivers from MotoDev

Once you have the above, you are ready to Flash your Motorola, make sure the Battery is FULLY charged.

Steps :

1. Connect the phone to the PC with the USB cable, making sure the phone is in Modem Mode, (this can be checked by going, Main Menu> Settings> Connections> USB Settings> then select Modem.)

Now start RSD Lite. wait for it to find your Phone,

Now you need to choose the file you want to flash,

Once you've selected the right flash, you can press Start, Let RSD Lite go through the Flashing cycle,

Your Phone will Re-Start, DON'T disconnect until the Result is PASS.

Congratulations, You've Flashed Your Phone

this guide is not to be reposted with out my permission

Regards Spike